diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/ipq8074.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/ipq8074.dtsi | 155 |
1 files changed, 140 insertions, 15 deletions
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 5b2c1986c8f4..00ed71936b47 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -29,8 +29,8 @@ }; cpus { - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; @@ -86,29 +86,40 @@ #size-cells = <2>; ranges; + bootloader@4a600000 { + reg = <0x0 0x4a600000 0x0 0x400000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + smem@4ab00000 { compatible = "qcom,smem"; - reg = <0x0 0x4ab00000 0x0 0x00100000>; + reg = <0x0 0x4ab00000 0x0 0x100000>; no-map; hwlocks = <&tcsr_mutex 0>; }; memory@4ac00000 { + reg = <0x0 0x4ac00000 0x0 0x400000>; no-map; - reg = <0x0 0x4ac00000 0x0 0x00400000>; }; }; firmware { scm { compatible = "qcom,scm-ipq8074", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x6100>; }; }; - soc: soc { - #address-cells = <0x1>; - #size-cells = <0x1>; + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; @@ -322,9 +333,9 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 70>; - #gpio-cells = <0x2>; + #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <0x2>; + #interrupt-cells = <2>; serial_4_pins: serial4-state { pins = "gpio23", "gpio24"; @@ -382,6 +393,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-ipq8074", "syscon"; + reg = <0x01937000 0x21000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -476,7 +492,6 @@ #size-cells = <0>; reg = <0x078b5000 0x600>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - spi-max-frequency = <50000000>; clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; @@ -534,6 +549,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b9000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -667,7 +696,7 @@ #address-cells = <1>; #size-cells = <1>; interrupt-controller; - #interrupt-cells = <0x3>; + #interrupt-cells = <3>; reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ranges = <0 0xb00a000 0xffd>; @@ -765,10 +794,10 @@ pcie1: pci@10000000 { compatible = "qcom,pcie-ipq8074"; - reg = <0x10000000 0xf1d>, - <0x10000f20 0xa8>, - <0x00088000 0x2000>, - <0x10100000 0x1000>; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x00088000 0x2000>, + <0x10100000 0x1000>; reg-names = "dbi", "elbi", "parf", "config"; device_type = "pci"; linux,pci-domain = <1>; @@ -904,6 +933,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 4>; + + trips { + nss-top-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss0-thermal { @@ -911,6 +948,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 5>; + + trips { + nss-0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; nss1-thermal { @@ -918,6 +963,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 6>; + + trips { + nss-1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya0-thermal { @@ -925,6 +978,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 7>; + + trips { + wcss-phya0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phya1-thermal { @@ -932,6 +993,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 8>; + + trips { + wcss-phya1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu0_thermal: cpu0-thermal { @@ -939,6 +1008,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 9>; + + trips { + cpu0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu1_thermal: cpu1-thermal { @@ -946,6 +1023,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 10>; + + trips { + cpu1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu2_thermal: cpu2-thermal { @@ -953,6 +1038,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 11>; + + trips { + cpu2-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cpu3_thermal: cpu3-thermal { @@ -960,6 +1053,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 12>; + + trips { + cpu3-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; cluster_thermal: cluster-thermal { @@ -967,6 +1068,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 13>; + + trips { + cluster-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb0-thermal { @@ -974,6 +1083,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 14>; + + trips { + wcss-phyb0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; wcss-phyb1-thermal { @@ -981,6 +1098,14 @@ polling-delay = <1000>; thermal-sensors = <&tsens 15>; + + trips { + wcss-phyb1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; }; }; }; |