diff options
Diffstat (limited to 'arch/arm64/Kconfig')
| -rw-r--r-- | arch/arm64/Kconfig | 203 |
1 files changed, 198 insertions, 5 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index ac9afde76dea..b1f9a20a3677 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1,6 +1,8 @@ config ARM64 def_bool y + select ARCH_BINFMT_ELF_RANDOMIZE_PIE select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE + select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_SG_CHAIN select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_USE_CMPXCHG_LOCKREF @@ -12,7 +14,9 @@ config ARM64 select ARM_ARCH_TIMER select ARM_GIC select AUDIT_ARCH_COMPAT_GENERIC + select ARM_GIC_V2M if PCI_MSI select ARM_GIC_V3 + select ARM_GIC_V3_ITS if PCI_MSI select BUILDTIME_EXTABLE_SORT select CLONE_BACKWARDS select COMMON_CLK @@ -23,9 +27,9 @@ config ARM64 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select GENERIC_CPU_AUTOPROBE select GENERIC_EARLY_IOREMAP - select GENERIC_IOMAP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP select GENERIC_SCHED_CLOCK select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER @@ -33,13 +37,16 @@ config ARM64 select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND + select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_AUDITSYSCALL select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT select HAVE_C_RECORDMCOUNT select HAVE_CC_STACKPROTECTOR + select HAVE_CMPXCHG_DOUBLE select HAVE_DEBUG_BUGVERBOSE select HAVE_DEBUG_KMEMLEAK select HAVE_DMA_API_DEBUG @@ -141,6 +148,11 @@ source "kernel/Kconfig.freezer" menu "Platform selection" +config ARCH_SEATTLE + bool "AMD Seattle SoC Family" + help + This enables support for AMD Seattle SOC Family + config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" help @@ -165,9 +177,6 @@ endmenu menu "Bus support" -config ARM_AMBA - bool - config PCI bool "PCI support" help @@ -192,6 +201,114 @@ endmenu menu "Kernel Features" +menu "ARM errata workarounds via the alternatives framework" + +config ARM64_ERRATUM_826319 + bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted" + default y + help + This option adds an alternative code sequence to work around ARM + erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or + AXI master interface and an L2 cache. + + If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors + and is unable to accept a certain write via this interface, it will + not progress on read data presented on the read data channel and the + system can deadlock. + + The workaround promotes data cache clean instructions to + data cache clean-and-invalidate. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + +config ARM64_ERRATUM_827319 + bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect" + default y + help + This option adds an alternative code sequence to work around ARM + erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI + master interface and an L2 cache. + + Under certain conditions this erratum can cause a clean line eviction + to occur at the same time as another transaction to the same address + on the AMBA 5 CHI interface, which can cause data corruption if the + interconnect reorders the two transactions. + + The workaround promotes data cache clean instructions to + data cache clean-and-invalidate. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + +config ARM64_ERRATUM_824069 + bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop" + default y + help + This option adds an alternative code sequence to work around ARM + erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected + to a coherent interconnect. + + If a Cortex-A53 processor is executing a store or prefetch for + write instruction at the same time as a processor in another + cluster is executing a cache maintenance operation to the same + address, then this erratum might cause a clean cache line to be + incorrectly marked as dirty. + + The workaround promotes data cache clean instructions to + data cache clean-and-invalidate. + Please note that this option does not necessarily enable the + workaround, as it depends on the alternative framework, which will + only patch the kernel if an affected CPU is detected. + + If unsure, say Y. + +config ARM64_ERRATUM_819472 + bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption" + default y + help + This option adds an alternative code sequence to work around ARM + erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache + present when it is connected to a coherent interconnect. + + If the processor is executing a load and store exclusive sequence at + the same time as a processor in another cluster is executing a cache + maintenance operation to the same address, then this erratum might + cause data corruption. + + The workaround promotes data cache clean instructions to + data cache clean-and-invalidate. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + +config ARM64_ERRATUM_832075 + bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads" + default y + help + This option adds an alternative code sequence to work around ARM + erratum 832075 on Cortex-A57 parts up to r1p2. + + Affected Cortex-A57 parts might deadlock when exclusive load/store + instructions to Write-Back memory are mixed with Device loads. + + The workaround is to promote device loads to use Load-Acquire + semantics. + Please note that this does not necessarily enable the workaround, + as it depends on the alternative framework, which will only patch + the kernel if an affected CPU is detected. + + If unsure, say Y. + +endmenu + + choice prompt "Page size" default ARM64_4K_PAGES @@ -232,7 +349,7 @@ config ARM64_VA_BITS_42 config ARM64_VA_BITS_48 bool "48-bit" - depends on BROKEN + depends on !ARM_SMMU endchoice @@ -344,6 +461,19 @@ config ARCH_HAS_CACHE_LINE_SIZE source "mm/Kconfig" +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + ---help--- + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl(PR_SET_SECCOMP), it cannot be disabled + and the task is only allowed to execute a few safe syscalls + defined by each seccomp mode. + config XEN_DOM0 def_bool y depends on XEN @@ -360,6 +490,58 @@ config FORCE_MAX_ZONEORDER default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE) default "11" +menuconfig ARMV8_DEPRECATED + bool "Emulate deprecated/obsolete ARMv8 instructions" + depends on COMPAT + help + Legacy software support may require certain instructions + that have been deprecated or obsoleted in the architecture. + + Enable this config to enable selective emulation of these + features. + + If unsure, say Y + +if ARMV8_DEPRECATED + +config SWP_EMULATION + bool "Emulate SWP/SWPB instructions" + help + ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that + they are always undefined. Say Y here to enable software + emulation of these instructions for userspace using LDXR/STXR. + + In some older versions of glibc [<=2.8] SWP is used during futex + trylock() operations with the assumption that the code will not + be preempted. This invalid assumption may be more likely to fail + with SWP emulation enabled, leading to deadlock of the user + application. + + NOTE: when accessing uncached shared regions, LDXR/STXR rely + on an external transaction monitoring block called a global + monitor to maintain update atomicity. If your system does not + implement a global monitor, this option can cause programs that + perform SWP operations to uncached memory to deadlock. + + If unsure, say Y + +config CP15_BARRIER_EMULATION + bool "Emulate CP15 Barrier instructions" + help + The CP15 barrier instructions - CP15ISB, CP15DSB, and + CP15DMB - are deprecated in ARMv8 (and ARMv7). It is + strongly recommended to use the ISB, DSB, and DMB + instructions instead. + + Say Y here to enable software emulation of these + instructions for AArch32 userspace code. When this option is + enabled, CP15 barrier usage is traced which can help + identify software that needs updating. + + If unsure, say Y + +endif + endmenu menu "Boot options" @@ -400,6 +582,17 @@ config EFI allow the kernel to be booted as an EFI application. This is only useful on systems that have UEFI firmware. +config DMI + bool "Enable support for SMBIOS (DMI) tables" + depends on EFI + default y + help + This enables SMBIOS/DMI feature for systems. + + This option is only useful on systems that have UEFI firmware. + However, even with this option, the resultant kernel should + continue to boot on existing non-UEFI platforms. + endmenu menu "Userspace binary formats" |