diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx/clock-s3c2443.c')
| -rw-r--r-- | arch/arm/mach-s3c24xx/clock-s3c2443.c | 212 |
1 files changed, 0 insertions, 212 deletions
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804e..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} |