1 files changed, 0 insertions, 132 deletions
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
deleted file mode 100644
index 8c657182fff3..000000000000
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "tegra20-tamonten.dtsi"
-
-/ {
-	model = "Avionic Design Medcom-Wide board";
-	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
-
-	aliases {
-		serial0 = &uartd;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-				nvidia,panel = <&panel>;
-			};
-		};
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
-
-	i2c@7000c000 {
-		wm8903: wm8903@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0>;
-			micdet-delay = <100>;
-			gpio-cfg = <0xffffffff
-				    0xffffffff
-				    0
-				    0xffffffff
-				    0xffffffff>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 5000000>;
-
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-		/* close enough */
-		power-supply = <&vdd_3v3_reg>;
-	};
-
-	panel: panel {
-		compatible = "innolux,n156bge-l21";
-
-		power-supply =  <&vdd_1v8_reg>; // <&vdd_3v3_reg>;
-		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
-
-		backlight = <&backlight>;
-	};
-
-	sound {
-		compatible = "ad,tegra-audio-wm8903-medcom-wide",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Avionic Design Medcom-Wide";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"Mic Jack", "MICBIAS",
-			"IN1L", "Mic Jack";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	vcc_24v_reg: regulator-24v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_24v";
-		regulator-min-microvolt = <24000000>;
-		regulator-max-microvolt = <24000000>;
-		regulator-always-on;
-	};
-
-	vdd_5v0_reg: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		vin-supply = <&vcc_24v_reg>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_reg: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&vcc_24v_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdd_1v8_reg: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8";
-		vin-supply = <&vdd_3v3_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-};