diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi')
-rw-r--r-- | arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi deleted file mode 100644 index abc595350e71..000000000000 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause -/* - * Copyright (C) 2020 Marek Vasut <marex@denx.de> - */ - -#include <dt-bindings/input/input.h> -#include <dt-bindings/pwm/pwm.h> - -/ { - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - led { - compatible = "gpio-leds"; - - led-0 { - label = "yellow:led"; - gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; -}; - -&adc { - status = "disabled"; -}; - -&dac { - status = "disabled"; -}; - -&fmc { - status = "disabled"; -}; - -&gpioa { - /* - * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable - * port power. This signal should be handled by USB power sequencing - * in order to turn on port power when USB bus is powered up, but so - * far there is no such functionality. - */ - usb-port-power-hog { - gpio-hog; - gpios = <13 0>; - output-low; - line-name = "usb-port-power"; - }; -}; - -&gpioc { - gpio-line-names = "", "", "", "", - "", "", "PicoITX-In1", "", - "", "", "", "", - "", "", "", ""; -}; - -&gpiod { - gpio-line-names = "", "", "", "", - "", "", "DHCOM-B", "", - "", "", "", "PicoITX-Out1", - "PicoITX-Out2", "", "", ""; -}; - -&gpiog { - gpio-line-names = "PicoITX-In2", "", "", "", - "", "", "", "", - "DHCOM-L", "", "", "", - "", "", "", ""; -}; - -&i2c2 { /* On board-to-board connector (optional) */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c5 { /* On board-to-board connector */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; -}; - -&ksz8851 { - status = "disabled"; -}; - -&usart3 { - pinctrl-names = "default"; - pinctrl-0 = <&usart3_pins_a>; - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; - /delete-property/dmas; - /delete-property/dma-names; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - status = "okay"; -}; - -&usbh_ohci { - phys = <&usbphyc_port0>; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "otg"; - pinctrl-0 = <&usbotg_hs_pins_a>; - pinctrl-names = "default"; - phy-names = "usb2-phy"; - phys = <&usbphyc_port1 0>; - vbus-supply = <&vbus_otg>; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; |