diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32746g-eval.dts')
| -rw-r--r-- | arch/arm/boot/dts/stm32746g-eval.dts | 222 |
1 files changed, 0 insertions, 222 deletions
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts deleted file mode 100644 index a293e65141c6..000000000000 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "stm32f746.dtsi" -#include "stm32f746-pinctrl.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "STMicroelectronics STM32746g-EVAL board"; - compatible = "st,stm32746g-eval", "st,stm32f746"; - - chosen { - bootargs = "root=/dev/ram"; - stdout-path = "serial0:115200n8"; - }; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x2000000>; - }; - - aliases { - serial0 = &usart1; - }; - - leds { - compatible = "gpio-leds"; - led-green { - gpios = <&gpiof 10 1>; - linux,default-trigger = "heartbeat"; - }; - led-orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - led-red { - gpios = <&gpiob 7 1>; - }; - led-blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - button-0 { - label = "Wake up"; - linux,code = <KEY_WAKEUP>; - gpios = <&gpioc 13 0>; - }; - }; - - joystick { - compatible = "gpio-keys"; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = <KEY_ENTER>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - }; - button-1 { - label = "JoyDown"; - linux,code = <KEY_DOWN>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = <KEY_LEFT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - }; - button-3 { - label = "JoyRight"; - linux,code = <KEY_RIGHT>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - }; - button-4 { - label = "JoyUp"; - linux,code = <KEY_UP>; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; - }; - }; - - usbotg_hs_phy: usb-phy { - #phy-cells = <0>; - compatible = "usb-nop-xceiv"; - clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>; - clock-names = "main_clk"; - }; - - mmc_vcard: mmc_vcard { - compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; -}; - -&clk_hse { - clock-frequency = <25000000>; -}; - -&crc { - status = "okay"; -}; - -&i2c1 { - pinctrl-0 = <&i2c1_pins_b>; - pinctrl-names = "default"; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - - stmfx_pinctrl: pinctrl { - compatible = "st,stmfx-0300-pinctrl"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; -}; - -&rtc { - status = "okay"; -}; - -&sdio1 { - status = "okay"; - vmmc-supply = <&mmc_vcard>; - broken-cd; - pinctrl-names = "default", "opendrain"; - pinctrl-0 = <&sdio_pins_a>; - pinctrl-1 = <&sdio_pins_od_a>; - bus-width = <4>; -}; - -&timers5 { - /* Override timer5 to act as clockevent */ - compatible = "st,stm32-timer"; - interrupts = <50>; - status = "okay"; - /delete-property/#address-cells; - /delete-property/#size-cells; - /delete-property/clock-names; - /delete-node/pwm; - /delete-node/timer@4; -}; - -&usart1 { - pinctrl-0 = <&usart1_pins_a>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usbotg_hs { - dr_mode = "otg"; - phys = <&usbotg_hs_phy>; - phy-names = "usb2-phy"; - pinctrl-0 = <&usbotg_hs_pins_a>; - pinctrl-names = "default"; - status = "okay"; -}; |