diff options
Diffstat (limited to 'arch/arm/boot/dts/s5pv210-goni.dts')
-rw-r--r-- | arch/arm/boot/dts/s5pv210-goni.dts | 447 |
1 files changed, 0 insertions, 447 deletions
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts deleted file mode 100644 index d32f42dd1bf5..000000000000 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ /dev/null @@ -1,447 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's S5PV210 SoC device tree source - * - * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. - * - * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> - * Tomasz Figa <t.figa@samsung.com> - * - * Board device tree source for Samsung Goni board. - */ - -/dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/input/input.h> -#include "s5pv210.dtsi" - -/ { - model = "Samsung Goni based on S5PC110"; - compatible = "samsung,goni", "samsung,s5pv210"; - - aliases { - i2c3 = &i2c_pmic; - }; - - chosen { - bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; - }; - - memory@30000000 { - device_type = "memory"; - reg = <0x30000000 0x05000000>, - <0x40000000 0x10000000>, - <0x50000000 0x08000000>; - }; - - pmic_ap_clk: clock-0 { - /* Workaround for missing clock on PMIC */ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - vtf_reg: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - pda_reg: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - bat_reg: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - - tsp_reg: regulator-3 { - compatible = "regulator-fixed"; - regulator-name = "TSP_VDD"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - i2c_pmic: i2c-pmic { - compatible = "i2c-gpio"; - sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - #address-cells = <1>; - #size-cells = <0>; - - pmic@66 { - compatible = "national,lp3974"; - reg = <0x66>; - - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, - <&gph0 4 GPIO_ACTIVE_HIGH>; - max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>; - - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; - max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; - - regulators { - ldo2_reg: LDO2 { - regulator-name = "VALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VUSB+MIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo6_reg: LDO6 { - regulator-name = "VCC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "VLCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "VUSB+VDAC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "VCC+VCAM_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo10_reg: LDO10 { - regulator-name = "VPLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-boot-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "CAM_IO_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo12_reg: LDO12 { - regulator-name = "CAM_ISP_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "CAM_A_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "CAM_CIF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "CAM_AF_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo17_reg: LDO17 { - regulator-name = "CAM_8M_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VARM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - buck2_reg: BUCK2 { - regulator-name = "VINT_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - buck3_reg: BUCK3 { - regulator-name = "VCC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "CAM_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ap32khz_reg: EN32KHz-AP { - regulator-name = "32KHz AP"; - regulator-always-on; - }; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gph2 6 1>; - linux,code = <KEY_POWER>; - label = "power"; - debounce-interval = <1>; - wakeup-source; - }; - }; -}; - -&xusbxti { - clock-frequency = <24000000>; -}; - -&keypad { - linux,input-no-autorepeat; - wakeup-source; - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, - <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; - status = "okay"; - - key-1 { - keypad,row = <0>; - keypad,column = <1>; - linux,code = <KEY_CONNECT>; - }; - - key-2 { - keypad,row = <0>; - keypad,column = <2>; - linux,code = <KEY_BACK>; - }; - - key-3 { - keypad,row = <1>; - keypad,column = <1>; - linux,code = <KEY_CAMERA_FOCUS>; - }; - - key-4 { - keypad,row = <1>; - keypad,column = <2>; - linux,code = <KEY_VOLUMEUP>; - }; - - key-5 { - keypad,row = <2>; - keypad,column = <1>; - linux,code = <KEY_CAMERA>; - }; - - key-6 { - keypad,row = <2>; - keypad,column = <2>; - linux,code = <KEY_VOLUMEDOWN>; - }; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&rtc { - clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; - clock-names = "rtc", "rtc_src"; -}; - -&sdhci0 { - bus-width = <4>; - non-removable; - vmmc-supply = <&ldo5_reg>; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; - pinctrl-names = "default"; - status = "okay"; -}; - -&sdhci2 { - bus-width = <4>; - cd-gpios = <&gph3 4 1>; - vmmc-supply = <&vtf_reg>; - cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - status = "okay"; -}; - -&hsotg { - vusb_a-supply = <&ldo3_reg>; - vusb_d-supply = <&ldo8_reg>; - dr_mode = "peripheral"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&i2c2 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <400000>; - samsung,i2c-slave-addr = <0x10>; - status = "okay"; - - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpj0>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&tsp_reg>; - }; -}; - -&i2c0 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <100000>; - samsung,i2c-slave-addr = <0x10>; - status = "okay"; - - noon010pc30: sensor@30 { - compatible = "siliconfile,noon010pc30"; - reg = <0x30>; - vddio-supply = <&ldo11_reg>; - vdda-supply = <&ldo13_reg>; - vdd_core-supply = <&ldo14_reg>; - - clock-frequency = <16000000>; - clocks = <&camera 0>; - clock-names = "mclk"; - nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>; - nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>; - - port { - noon010pc30_ep: endpoint { - remote-endpoint = <&fimc0_ep>; - bus-width = <8>; - hsync-active = <0>; - vsync-active = <1>; - pclk-sample = <1>; - }; - }; - }; -}; - -&camera { - pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; - pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; - pinctrl-names = "default", "idle"; - - parallel-ports { - #address-cells = <1>; - #size-cells = <0>; - - /* camera A input */ - port@1 { - reg = <1>; - fimc0_ep: endpoint { - remote-endpoint = <&noon010pc30_ep>; - bus-width = <8>; - hsync-active = <1>; - vsync-active = <1>; - pclk-sample = <0>; - }; - }; - }; -}; - -&fimd { - pinctrl-0 = <&lcd_clk &lcd_data24>; - pinctrl-names = "default"; - status = "okay"; - - display-timings { - native-mode = <&timing0>; - timing0: timing { - /* 480x800@55Hz */ - clock-frequency = <23439570>; - hactive = <480>; - hfront-porch = <16>; - hback-porch = <16>; - hsync-len = <2>; - vactive = <800>; - vback-porch = <2>; - vfront-porch = <28>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <0>; - pixelclk-active = <0>; - }; - }; -}; - -&onenand { - status = "okay"; -}; |