diff options
Diffstat (limited to 'arch/arm/boot/dts/rk3288-veyron-pinky.dts')
-rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-pinky.dts | 137 |
1 files changed, 0 insertions, 137 deletions
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts deleted file mode 100644 index e2a4e6232eb5..000000000000 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ /dev/null @@ -1,137 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Google Veyron Pinky Rev 2 board device tree source - * - * Copyright 2015 Google, Inc - */ - -/dts-v1/; -#include "rk3288-veyron-chromebook.dtsi" -#include "cros-ec-sbs.dtsi" - -/ { - model = "Google Pinky"; - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", - "google,veyron", "rockchip,rk3288"; - - /delete-node/backlight-regulator; - /delete-node/panel-regulator; - /delete-node/emmc-pwrseq; - /delete-node/vcc18-lcd; -}; - -&backlight { - /delete-property/power-supply; -}; - -&emmc { - /* - * Use a pullup instead of a drive since the output is 3.3V and - * really should be 1.8V (oops). The external pulldown will help - * bring the voltage down if we only drive with a pullup here. - * Therefore disable the powerseq (and actual reset) for pinky. - */ - /delete-property/mmc-pwrseq; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; -}; - -&edp { - /delete-property/pinctrl-names; - /delete-property/pinctrl-0; - - force-hpd; -}; - -&lid_switch { - pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; - - key-power { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; - }; -}; - -/* Touchpad connector */ -&i2c3 { - status = "okay"; - - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; -}; - -&panel { - power-supply = <&vcc33_lcd>; -}; - -&pinctrl { - pinctrl-names = "default", "sleep"; - pinctrl-0 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Wake only */ - &suspend_l_wake - &bt_dev_wake_awake - >; - pinctrl-1 = < - /* Common for sleep and wake, but no owners */ - &ddr0_retention - &ddrio_pwroff - &global_pwroff - - /* Sleep only */ - &suspend_l_sleep - &bt_dev_wake_sleep - >; - - /delete-node/ lcd; - - backlight { - /delete-node/ bl_pwr_en; - }; - - buttons { - pwr_key_h: pwr-key-h { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - sdmmc { - sdmmc_wp_pin: sdmmc-wp-pin { - rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&rk808 { - regulators { - vcc18_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; -}; - -&sdmmc { - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin - &sdmmc_wp_pin &sdmmc_bus4>; - wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; -}; - -&tsadc { - /* Some connection is flaky making the tsadc hang the system */ - status = "disabled"; -}; |