diff options
Diffstat (limited to 'arch/arm/boot/dts/r8a7792-wheat.dts')
| -rw-r--r-- | arch/arm/boot/dts/r8a7792-wheat.dts | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts deleted file mode 100644 index 434e4655be9d..000000000000 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ /dev/null @@ -1,329 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Wheat board - * - * Copyright (C) 2016 Renesas Electronics Corporation - * Copyright (C) 2016 Cogent Embedded, Inc. - */ - -/dts-v1/; -#include "r8a7792.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Wheat"; - compatible = "renesas,wheat", "renesas,r8a7792"; - - aliases { - serial0 = &scif0; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - d3_3v: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ethernet@18000000 { - compatible = "smsc,lan89218", "smsc,lan9115"; - reg = <0 0x18000000 0 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqc>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - smsc,irq-push-pull; - smsc,save-mac-address; - reg-io-width = <4>; - vddvario-supply = <&d3_3v>; - vdd33a-supply = <&d3_3v>; - - pinctrl-0 = <&lan89218_pins>; - pinctrl-names = "default"; - }; - - keyboard { - compatible = "gpio-keys"; - - key-a { - linux,code = <KEY_A>; - label = "SW2"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; - }; - key-b { - linux,code = <KEY_B>; - label = "SW3"; - wakeup-source; - debounce-interval = <20>; - gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; - }; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - hdmi-out0 { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con0: endpoint { - remote-endpoint = <&adv7513_0_out>; - }; - }; - }; - - hdmi-out1 { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con1: endpoint { - remote-endpoint = <&adv7513_1_out>; - }; - }; - }; - - osc2_clk: osc2 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; -}; - -&extal_clk { - clock-frequency = <20000000>; -}; - -&pfc { - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; - - lan89218_pins: lan89218 { - intc { - groups = "intc_irq0"; - function = "intc"; - }; - lbsc { - groups = "lbsc_ex_cs0"; - function = "lbsc"; - }; - }; - - can0_pins: can0 { - groups = "can0_data"; - function = "can0"; - }; - - can1_pins: can1 { - groups = "can1_data"; - function = "can1"; - }; - - sdhi0_pins: sdhi0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - }; - - qspi_pins: qspi { - groups = "qspi_ctrl", "qspi_data4"; - function = "qspi"; - }; - - du0_pins: du0 { - groups = "du0_rgb888", "du0_sync", "du0_disp"; - function = "du0"; - }; - - du1_pins: du1 { - groups = "du1_rgb666", "du1_sync", "du1_disp"; - function = "du1"; - }; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&can0 { - pinctrl-0 = <&can0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&can1 { - pinctrl-0 = <&can1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&vcc_sdhi0>; - cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&qspi { - pinctrl-0 = <&qspi_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "spansion,s25fl512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - spi-cpol; - spi-cpha; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash"; - reg = <0x00440000 0x03bc0000>; - }; - }; - }; -}; - -&i2c4 { - status = "okay"; - clock-frequency = <400000>; - - /* - * The adv75xx resets its addresses to defaults during low power mode. - * Because we have two ADV7513 devices on the same bus, we must change - * both of them away from the defaults so that they do not conflict. - */ - hdmi@3d { - compatible = "adi,adv7513"; - reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; - reg-names = "main", "edid", "cec", "packet"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7513_0_in: endpoint { - remote-endpoint = <&du_out_rgb0>; - }; - }; - - port@1 { - reg = <1>; - adv7513_0_out: endpoint { - remote-endpoint = <&hdmi_con0>; - }; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7513"; - reg = <0x39>, <0x49>, <0x29>, <0x59>; - reg-names = "main", "edid", "cec", "packet"; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7513_1_in: endpoint { - remote-endpoint = <&du_out_rgb1>; - }; - }; - - port@1 { - reg = <1>; - adv7513_1_out: endpoint { - remote-endpoint = <&hdmi_con1>; - }; - }; - }; - }; -}; - -&du { - pinctrl-0 = <&du0_pins>, <&du1_pins>; - pinctrl-names = "default"; - - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>; - clock-names = "du.0", "du.1", "dclkin.0"; - status = "okay"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7513_0_in>; - }; - }; - port@1 { - endpoint { - remote-endpoint = <&adv7513_1_in>; - }; - }; - }; -}; |