diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts')
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 661 |
1 files changed, 0 insertions, 661 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts deleted file mode 100644 index 861695cecf84..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ /dev/null @@ -1,661 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/input/input.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -/ { - model = "LGE MSM 8974 HAMMERHEAD"; - compatible = "lge,hammerhead", "qcom,msm8974"; - chassis-type = "handset"; - - aliases { - serial0 = &blsp1_uart1; - serial1 = &blsp2_uart4; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - key-volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEUP>; - }; - - key-volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; - linux,input-type = <1>; - linux,code = <KEY_VOLUMEDOWN>; - }; - }; - - vreg_wlan: wlan-regulator { - compatible = "regulator-fixed"; - - regulator-name = "wl-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_regulator_pin>; - }; -}; - -&blsp1_i2c1 { - status = "okay"; - clock-frequency = <100000>; - - charger: bq24192@6b { - compatible = "ti,bq24192"; - reg = <0x6b>; - interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>; - - omit-battery-class; - - usb_otg_vbus: usb-otg-vbus { }; - }; - - fuelgauge: max17048@36 { - compatible = "maxim,max17048"; - reg = <0x36>; - - maxim,double-soc; - maxim,rcomp = /bits/ 8 <0x4d>; - - interrupt-parent = <&tlmm>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&fuelgauge_pin>; - - maxim,alert-low-soc-level = <2>; - }; -}; - -&blsp1_i2c2 { - status = "okay"; - clock-frequency = <355000>; - - synaptics@70 { - compatible = "syna,rmi4-i2c"; - reg = <0x70>; - - interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l22>; - vio-supply = <&pm8941_lvs3>; - - pinctrl-names = "default"; - pinctrl-0 = <&touch_pin>; - - #address-cells = <1>; - #size-cells = <0>; - - rmi4-f01@1 { - reg = <0x1>; - syna,nosleep-mode = <1>; - }; - - rmi4-f12@12 { - reg = <0x12>; - syna,sensor-type = <1>; - }; - }; -}; - -&blsp1_i2c3 { - status = "okay"; - clock-frequency = <100000>; - - avago_apds993@39 { - compatible = "avago,apds9930"; - reg = <0x39>; - interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&pm8941_l17>; - vddio-supply = <&pm8941_lvs1>; - led-max-microamp = <100000>; - amstaos,proximity-diodes = <0>; - }; -}; - -&blsp2_i2c5 { - status = "okay"; - clock-frequency = <355000>; - - led-controller@38 { - compatible = "ti,lm3630a"; - status = "okay"; - reg = <0x38>; - - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - led-sources = <0 1>; - label = "lcd-backlight"; - default-brightness = <200>; - }; - }; -}; - -&blsp2_i2c6 { - status = "okay"; - clock-frequency = <100000>; - - mpu6515@68 { - compatible = "invensense,mpu6515"; - reg = <0x68>; - interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>; - vddio-supply = <&pm8941_lvs1>; - - pinctrl-names = "default"; - pinctrl-0 = <&mpu6515_pin>; - - mount-matrix = "0", "-1", "0", - "-1", "0", "0", - "0", "0", "1"; - - i2c-gate { - #address-cells = <1>; - #size-cells = <0>; - ak8963@f { - compatible = "asahi-kasei,ak8963"; - reg = <0x0f>; - gpios = <&tlmm 67 GPIO_ACTIVE_HIGH>; - vid-supply = <&pm8941_lvs1>; - vdd-supply = <&pm8941_l17>; - }; - - bmp280@76 { - compatible = "bosch,bmp280"; - reg = <0x76>; - vdda-supply = <&pm8941_lvs1>; - vddd-supply = <&pm8941_l17>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; -}; - -&blsp2_uart4 { - status = "okay"; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - - pinctrl-names = "default"; - pinctrl-0 = <&bt_pin>; - - host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; - }; -}; - -&dsi0 { - status = "okay"; - - vdda-supply = <&pm8941_l2>; - vdd-supply = <&pm8941_lvs3>; - vddio-supply = <&pm8941_l12>; - - panel: panel@0 { - reg = <0>; - compatible = "lg,acx467akm-7"; - - pinctrl-names = "default"; - pinctrl-0 = <&panel_pin>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; -}; - -&dsi0_out { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; -}; - -&dsi0_phy { - status = "okay"; - - vddio-supply = <&pm8941_l12>; -}; - -&mdss { - status = "okay"; -}; - -&pm8941_gpios { - gpio_keys_pin_a: gpio-keys-active-state { - pins = "gpio2", "gpio3"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - - fuelgauge_pin: fuelgauge-int-state { - pins = "gpio9"; - function = "normal"; - - bias-disable; - input-enable; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_sleep_clk_pin: wl-sleep-clk-state { - pins = "gpio16"; - function = "func2"; - - output-high; - power-source = <PM8941_GPIO_S3>; - }; - - wlan_regulator_pin: wl-reg-active-state { - pins = "gpio17"; - function = "normal"; - - bias-disable; - power-source = <PM8941_GPIO_S3>; - }; - - otg { - gpio-hog; - gpios = <35 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "otg-gpio"; - }; -}; - -&pm8941_lpg { - status = "okay"; - - qcom,power-source = <1>; - - multi-led { - color = <LED_COLOR_ID_RGB>; - function = LED_FUNCTION_STATUS; - - #address-cells = <1>; - #size-cells = <0>; - - led@7 { - reg = <7>; - color = <LED_COLOR_ID_RED>; - }; - - led@6 { - reg = <6>; - color = <LED_COLOR_ID_GREEN>; - }; - - led@5 { - reg = <5>; - color = <LED_COLOR_ID_BLUE>; - }; - }; -}; - -&remoteproc_adsp { - cx-supply = <&pm8841_s2>; -}; - -&remoteproc_mss { - cx-supply = <&pm8841_s2>; - mss-supply = <&pm8841_s3>; - mx-supply = <&pm8841_s1>; - pll-supply = <&pm8941_l12>; -}; - -&rpm_requests { - regulators-0 { - compatible = "qcom,rpm-pm8841-regulators"; - - pm8841_s1: s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s2: s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s3: s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - pm8841_s4: s4 { - regulator-min-microvolt = <815000>; - regulator-max-microvolt = <900000>; - }; - }; - - regulators-1 { - compatible = "qcom,rpm-pm8941-regulators"; - - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - pm8941_s1: s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_s2: s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - regulator-boot-on; - }; - - pm8941_s3: s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_l1: l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_l2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - pm8941_l3: l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pm8941_l4: l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - pm8941_l5: l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - pm8941_l7: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - pm8941_l8: l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l9: l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8941_l10: l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - pm8941_l11: l11 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - pm8941_l12: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - pm8941_l13: l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-boot-on; - }; - - pm8941_l14: l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - pm8941_l15: l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - pm8941_l16: l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - pm8941_l17: l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pm8941_l18: l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - pm8941_l19: l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pm8941_l20: l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-system-load = <200000>; - regulator-allow-set-load; - regulator-boot-on; - }; - - pm8941_l21: l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-boot-on; - }; - - pm8941_l22: l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - pm8941_l23: l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - pm8941_l24: l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - regulator-boot-on; - }; - - pm8941_lvs1: lvs1 {}; - pm8941_lvs3: lvs3 {}; - }; -}; - -&sdhc_1 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_on>; - pinctrl-1 = <&sdc1_off>; -}; - -&sdhc_2 { - status = "okay"; - - max-frequency = <100000000>; - vmmc-supply = <&vreg_wlan>; - vqmmc-supply = <&pm8941_s3>; - non-removable; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; - - bcrmf@1 { - compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; - reg = <1>; - - brcm,drive-strength = <10>; - - pinctrl-names = "default"; - pinctrl-0 = <&wlan_sleep_clk_pin>; - }; -}; - -&tlmm { - sdc1_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdc2_on: sdc2-on-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <6>; - bias-disable; - }; - - cmd-data-pins { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - mpu6515_pin: mpu6515-state { - pins = "gpio73"; - function = "gpio"; - bias-disable; - }; - - touch_pin: touch-state { - int-pins { - pins = "gpio5"; - function = "gpio"; - - drive-strength = <2>; - bias-disable; - }; - - reset-pins { - pins = "gpio8"; - function = "gpio"; - - drive-strength = <2>; - bias-pull-up; - }; - }; - - panel_pin: panel-state { - pins = "gpio12"; - function = "mdp_vsync"; - drive-strength = <2>; - bias-disable; - }; - - bt_pin: bt-state { - hostwake-pins { - pins = "gpio42"; - function = "gpio"; - }; - - devwake-pins { - pins = "gpio62"; - function = "gpio"; - }; - - shutdown-pins { - pins = "gpio41"; - function = "gpio"; - }; - }; -}; - -&usb { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - - extcon = <&charger>, <&usb_id>; - vbus-supply = <&usb_otg_vbus>; - - hnp-disable; - srp-disable; - adp-disable; -}; - -&usb_hs1_phy { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - qcom,init-seq = /bits/ 8 <0x1 0x64>; -}; |