diff options
Diffstat (limited to 'arch/arm/boot/dts/omap4-sdp.dts')
-rw-r--r-- | arch/arm/boot/dts/omap4-sdp.dts | 717 |
1 files changed, 0 insertions, 717 deletions
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts deleted file mode 100644 index 9e976140f34a..000000000000 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ /dev/null @@ -1,717 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/ - */ -/dts-v1/; - -#include "omap443x.dtsi" -#include "elpida_ecb240abacn.dtsi" -#include "omap4-mcpdm.dtsi" - -/ { - model = "TI OMAP4 SDP board"; - compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4"; - - memory@80000000 { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - aliases { - display0 = &lcd0; - display1 = &lcd1; - display2 = &hdmi0; - }; - - vdd_eth: fixedregulator-vdd-eth { - pinctrl-names = "default"; - pinctrl-0 = <&enet_enable_gpio>; - - compatible = "regulator-fixed"; - regulator-name = "VDD_ETH"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ - enable-active-high; - regulator-boot-on; - startup-delay-us = <25000>; - }; - - vbat: fixedregulator-vbat { - compatible = "regulator-fixed"; - regulator-name = "VBAT"; - regulator-min-microvolt = <3750000>; - regulator-max-microvolt = <3750000>; - regulator-boot-on; - }; - - led-controller-1 { - compatible = "gpio-leds"; - - led-1 { - label = "omap4:green:debug0"; - gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */ - }; - - led-2 { - label = "omap4:green:debug1"; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */ - }; - - led-3 { - label = "omap4:green:debug2"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */ - }; - - led-4 { - label = "omap4:green:debug3"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */ - }; - - led-5 { - label = "omap4:green:debug4"; - gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */ - }; - - led-6 { - label = "omap4:blue:user"; - gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */ - }; - - led-7 { - label = "omap4:red:user"; - gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */ - }; - - led-8 { - label = "omap4:green:user"; - gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */ - }; - }; - - led-controller-2 { - compatible = "pwm-leds"; - - led-9 { - label = "omap4::keypad"; - pwms = <&twl_pwm 0 7812500>; - max-brightness = <127>; - }; - - led-10 { - label = "omap4:green:chrg"; - pwms = <&twl_pwmled 0 7812500>; - max-brightness = <255>; - }; - }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&twl_pwm 1 7812500>; - brightness-levels = < - 0 10 20 30 40 - 50 60 70 80 90 - 100 110 120 127 - >; - default-brightness-level = <13>; - }; - - sound { - compatible = "ti,abe-twl6040"; - ti,model = "SDP4430"; - - ti,jack-detection = <1>; - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - ti,dmic = <&dmic>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Earphone Spk", "EP", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "Vibrator", "VIBRAL", - "Vibrator", "VIBRAR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "MAINMIC", "Main Handset Mic", - "Main Handset Mic", "Main Mic Bias", - "SUBMIC", "Sub Handset Mic", - "Sub Handset Mic", "Main Mic Bias", - "AFML", "Line In", - "AFMR", "Line In", - "DMic", "Digital Mic", - "Digital Mic", "Digital Mic1 Bias"; - }; - - /* regulator for wl12xx on sdio5 */ - wl12xx_vmmc: wl12xx_vmmc { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_gpio>; - compatible = "regulator-fixed"; - regulator-name = "vwl1271"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; - startup-delay-us = <70000>; - enable-active-high; - }; - - tpd12s015: encoder { - compatible = "ti,tpd12s015"; - - gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ - <&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */ - <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "c"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &dss_hdmi_pins - &tpd12s015_pins - >; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ - OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ - OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ - OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ - >; - }; - - uart4_pins: pinmux_uart4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */ - OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */ - >; - }; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */ - OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ - >; - }; - - dmic_pins: pinmux_dmic_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */ - OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */ - OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */ - OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */ - OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */ - OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */ - OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */ - >; - }; - - mcspi1_pins: pinmux_mcspi1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ - OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ - OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ - OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ - OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */ - OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */ - OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ - >; - }; - - i2c4_pins: pinmux_i2c4_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ - >; - }; - - /* wl12xx GPIO output for WLAN_EN */ - wl12xx_gpio: pinmux_wl12xx_gpio { - pinctrl-single,pins = < - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */ - >; - }; - - /* wl12xx GPIO inputs and SDIO pins */ - wl12xx_pins: pinmux_wl12xx_pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ - OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ - OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ - OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ - OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ - OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ - >; - }; - - /* gpio_48 for ENET_ENABLE */ - enet_enable_gpio: pinmux_enet_enable_gpio { - pinctrl-single,pins = < - OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */ - >; - }; - - ks8851_pins: pinmux_ks8851_pins { - pinctrl-single,pins = < - /* ENET_INT */ - OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */ - /* - * Misterious pin which makes the ethernet working - * The legacy board file requested this pin on boot - * (ETH_KS8851_QUART) and set it to high, similarly to - * the ENET_ENABLE pin. - * We could use gpio-hog to keep it high, but let's use - * it as a reset GPIO for ks8851. - */ - OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */ - >; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - #clock-cells = <0>; - reg = <0x4b>; - - pinctrl-names = "default"; - pinctrl-0 = <&twl6040_pins>; - - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - - /* regulators for vibra motor */ - vddvibl-supply = <&vbat>; - vddvibr-supply = <&vbat>; - - vibra { - /* Vibra driver, motor resistance parameters */ - ti,vibldrv-res = <8>; - ti,vibrdrv-res = <3>; - ti,viblmotor-res = <10>; - ti,vibrmotor-res = <10>; - }; - }; -}; - -#include "twl6030.dtsi" -#include "twl6030_omap4.dtsi" - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - - clock-frequency = <400000>; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - - clock-frequency = <400000>; - - /* - * Temperature Sensor - * https://www.ti.com/lit/ds/symlink/tmp105.pdf - */ - tmp105@48 { - compatible = "ti,tmp105"; - reg = <0x48>; - }; - - /* - * Ambient Light Sensor - * http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf - */ - bh1780@29 { - compatible = "rohm,bh1780"; - reg = <0x29>; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; - - clock-frequency = <400000>; - - /* - * 3-Axis Digital Compass - * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf - */ - hmc5843@1e { - compatible = "honeywell,hmc5843"; - reg = <0x1e>; - }; -}; - -&mcspi1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi1_pins>; - - eth@0 { - pinctrl-names = "default"; - pinctrl-0 = <&ks8851_pins>; - - compatible = "ks8851"; - spi-max-frequency = <24000000>; - reg = <0>; - interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */ - vdd-supply = <&vdd_eth>; - reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - vmmc-supply = <&vaux1>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - pinctrl-names = "default"; - pinctrl-0 = <&wl12xx_pins>; - vmmc-supply = <&wl12xx_vmmc>; - non-removable; - bus-width = <4>; - cap-power-off-card; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1281"; - reg = <2>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ - ref-clock-frequency = <26000000>; - tcxo-clock-frequency = <26000000>; - }; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&keypad { - keypad,num-rows = <8>; - keypad,num-columns = <8>; - linux,keymap = <0x00000012 /* KEY_E */ - 0x00010013 /* KEY_R */ - 0x00020014 /* KEY_T */ - 0x00030066 /* KEY_HOME */ - 0x0004003f /* KEY_F5 */ - 0x000500f0 /* KEY_UNKNOWN */ - 0x00060017 /* KEY_I */ - 0x0007002a /* KEY_LEFTSHIFT */ - 0x01000020 /* KEY_D*/ - 0x01010021 /* KEY_F */ - 0x01020022 /* KEY_G */ - 0x010300e7 /* KEY_SEND */ - 0x01040040 /* KEY_F6 */ - 0x010500f0 /* KEY_UNKNOWN */ - 0x01060025 /* KEY_K */ - 0x0107001c /* KEY_ENTER */ - 0x0200002d /* KEY_X */ - 0x0201002e /* KEY_C */ - 0x0202002f /* KEY_V */ - 0x0203006b /* KEY_END */ - 0x02040041 /* KEY_F7 */ - 0x020500f0 /* KEY_UNKNOWN */ - 0x02060034 /* KEY_DOT */ - 0x0207003a /* KEY_CAPSLOCK */ - 0x0300002c /* KEY_Z */ - 0x0301004e /* KEY_KPLUS */ - 0x03020030 /* KEY_B */ - 0x0303003b /* KEY_F1 */ - 0x03040042 /* KEY_F8 */ - 0x030500f0 /* KEY_UNKNOWN */ - 0x03060018 /* KEY_O */ - 0x03070039 /* KEY_SPACE */ - 0x04000011 /* KEY_W */ - 0x04010015 /* KEY_Y */ - 0x04020016 /* KEY_U */ - 0x0403003c /* KEY_F2 */ - 0x04040073 /* KEY_VOLUMEUP */ - 0x040500f0 /* KEY_UNKNOWN */ - 0x04060026 /* KEY_L */ - 0x04070069 /* KEY_LEFT */ - 0x0500001f /* KEY_S */ - 0x05010023 /* KEY_H */ - 0x05020024 /* KEY_J */ - 0x0503003d /* KEY_F3 */ - 0x05040043 /* KEY_F9 */ - 0x05050072 /* KEY_VOLUMEDOWN */ - 0x05060032 /* KEY_M */ - 0x0507006a /* KEY_RIGHT */ - 0x06000010 /* KEY_Q */ - 0x0601001e /* KEY_A */ - 0x06020031 /* KEY_N */ - 0x0603009e /* KEY_BACK */ - 0x0604000e /* KEY_BACKSPACE */ - 0x060500f0 /* KEY_UNKNOWN */ - 0x06060019 /* KEY_P */ - 0x06070067 /* KEY_UP */ - 0x07000094 /* KEY_PROG1 */ - 0x07010095 /* KEY_PROG2 */ - 0x070200ca /* KEY_PROG3 */ - 0x070300cb /* KEY_PROG4 */ - 0x0704003e /* KEY_F4 */ - 0x070500f0 /* KEY_UNKNOWN */ - 0x07060160 /* KEY_OK */ - 0x0707006c>; /* KEY_DOWN */ - linux,input-no-autorepeat; -}; - -&uart2 { - interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART2_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; -}; - -&uart3 { - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART3_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; - -&uart4 { - interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH - &omap4_pmx_core OMAP4_UART4_RX>; - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins>; -}; - -&mcbsp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp1_pins>; - status = "okay"; -}; - -&mcbsp2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; -}; - -&dmic { - pinctrl-names = "default"; - pinctrl-0 = <&dmic_pins>; - status = "okay"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -}; - -&usb_otg_hs { - interface-type = <1>; - mode = <3>; - power = <50>; -}; - -&dss { - status = "okay"; -}; - -&dsi1 { - status = "okay"; - vdd-supply = <&vcxio>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: panel@0 { - compatible = "tpo,taal", "panel-dsi-cm"; - reg = <0>; - label = "lcd0"; - - reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - -&dsi2 { - status = "okay"; - vdd-supply = <&vcxio>; - - port { - dsi2_out_ep: endpoint { - remote-endpoint = <&lcd1_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd1: panel@0 { - compatible = "tpo,taal", "panel-dsi-cm"; - reg = <0>; - label = "lcd1"; - - reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */ - - port { - lcd1_in: endpoint { - remote-endpoint = <&dsi2_out_ep>; - }; - }; - }; -}; - -&hdmi { - status = "okay"; - vdda-supply = <&vdac>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; -}; |