diff options
Diffstat (limited to 'arch/arm/boot/dts/omap36xx.dtsi')
-rw-r--r-- | arch/arm/boot/dts/omap36xx.dtsi | 250 |
1 files changed, 0 insertions, 250 deletions
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi deleted file mode 100644 index fff9c3d34193..000000000000 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ /dev/null @@ -1,250 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Device Tree Source for OMAP3 SoC - * - * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include <dt-bindings/bus/ti-sysc.h> -#include <dt-bindings/media/omap3-isp.h> - -#include "omap3.dtsi" - -/ { - aliases { - serial3 = &uart4; - }; - - cpus { - /* OMAP3630/OMAP37xx variants OPP50 to OPP130 and OPP1G */ - cpu: cpu@0 { - operating-points-v2 = <&cpu0_opp_table>; - - vbb-supply = <&abb_mpu_iva>; - clock-latency = <300000>; /* From omap-cpufreq driver */ - #cooling-cells = <2>; - }; - }; - - cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - /* - * we currently only select the max voltage from table - * Table 4-19 of the DM3730 Data sheet (SPRS685B) - * Format is: cpu0-supply: <target min max> - * vbb-supply: <target min max> - */ - opp-microvolt = <1012500 1012500 1012500>, - <1012500 1012500 1012500>; - /* - * first value is silicon revision bit mask - * second one is "speed binned" bit mask - */ - opp-supported-hw = <0xffffffff 3>; - opp-suspend; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1200000 1200000>, - <1200000 1200000 1200000>; - opp-supported-hw = <0xffffffff 3>; - }; - - opp130-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1325000 1325000 1325000>, - <1325000 1325000 1325000>; - opp-supported-hw = <0xffffffff 3>; - }; - - opp1g-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1375000 1375000 1375000>, - <1375000 1375000 1375000>; - /* only on am/dm37x with speed-binned bit set */ - opp-supported-hw = <0xffffffff 2>; - }; - }; - - opp_supply_mpu_iva: opp_supply { - compatible = "ti,omap-opp-supply"; - ti,absolute-max-voltage-uv = <1375000>; - }; - - ocp@68000000 { - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - reg = <0x49042000 0x400>; - interrupts = <80>; - dmas = <&sdma 81 &sdma 82>; - dma-names = "tx", "rx"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - - abb_mpu_iva: regulator-abb-mpu { - compatible = "ti,abb-v1"; - regulator-name = "abb_mpu_iva"; - #address-cells = <0>; - #size-cells = <0>; - reg = <0x483072f0 0x8>, <0x48306818 0x4>; - reg-names = "base-address", "int-address"; - ti,tranxdone-status-mask = <0x4000000>; - clocks = <&sys_ck>; - ti,settling-time = <30>; - ti,clock-cycles = <8>; - ti,abb_info = < - /*uV ABB efuse rbb_m fbb_m vset_m*/ - 1012500 0 0 0 0 0 - 1200000 0 0 0 0 0 - 1325000 0 0 0 0 0 - 1375000 1 0 0 0 0 - >; - }; - - omap3_pmx_core2: pinmux@480025a0 { - compatible = "ti,omap3-padconf", "pinctrl-single"; - reg = <0x480025a0 0x5c>; - #address-cells = <1>; - #size-cells = <0>; - #pinctrl-cells = <1>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0xff1f>; - }; - - isp: isp@480bc000 { - compatible = "ti,omap3-isp"; - reg = <0x480bc000 0x12fc - 0x480bd800 0x0600>; - interrupts = <24>; - iommus = <&mmu_isp>; - syscon = <&scm_conf 0x2f0>; - ti,phy-type = <OMAP3ISP_PHY_TYPE_CSIPHY>; - #clock-cells = <1>; - ports { - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - bandgap: bandgap@48002524 { - reg = <0x48002524 0x4>; - compatible = "ti,omap36xx-bandgap"; - #thermal-sensor-cells = <0>; - }; - - target-module@480cb000 { - compatible = "ti,sysc-omap3630-sr", "ti,sysc"; - ti,hwmods = "smartreflex_core"; - reg = <0x480cb038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&sr2_fck>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x480cb000 0x001000>; - - smartreflex_core: smartreflex@0 { - compatible = "ti,omap3-smartreflex-core"; - reg = <0 0x400>; - interrupts = <19>; - }; - }; - - target-module@480c9000 { - compatible = "ti,sysc-omap3630-sr", "ti,sysc"; - ti,hwmods = "smartreflex_mpu_iva"; - reg = <0x480c9038 0x4>; - reg-names = "sysc"; - ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&sr1_fck>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x480c9000 0x001000>; - - - smartreflex_mpu_iva: smartreflex@480c9000 { - compatible = "ti,omap3-smartreflex-mpu-iva"; - reg = <0 0x400>; - interrupts = <18>; - }; - }; - - /* - * Note that the sysconfig register layout is a subset of the - * "ti,sysc-omap4" type register with just sidle and midle bits - * available while omap34xx has "ti,sysc-omap2" type sysconfig. - */ - sgx_module: target-module@50000000 { - compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x5000fe00 0x4>, - <0x5000fe10 0x4>; - reg-names = "rev", "sysc"; - ti,sysc-midle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - ti,sysc-sidle = <SYSC_IDLE_FORCE>, - <SYSC_IDLE_NO>, - <SYSC_IDLE_SMART>; - clocks = <&sgx_fck>, <&sgx_ick>; - clock-names = "fck", "ick"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x50000000 0x2000000>; - - /* - * Closed source PowerVR driver, no child device - * binding or driver in mainline - */ - }; - }; - - thermal_zones: thermal-zones { - #include "omap3-cpu-thermal.dtsi" - }; -}; - -&sdma { - compatible = "ti,omap3630-sdma", "ti,omap-sdma"; -}; - -/* OMAP3630 needs dss_96m_fck for VENC */ -&venc { - clocks = <&dss_tv_fck>, <&dss_96m_fck>; - clock-names = "fck", "tv_dac_clk"; -}; - -&ssi { - status = "okay"; - - clocks = <&ssi_ssr_fck>, - <&ssi_sst_fck>, - <&ssi_ick>; - clock-names = "ssi_ssr_fck", - "ssi_sst_fck", - "ssi_ick"; -}; - -&usb_otg_target { - clocks = <&hsotgusb_ick_3430es2>; -}; - -/include/ "omap34xx-omap36xx-clocks.dtsi" -/include/ "omap36xx-omap3430es2plus-clocks.dtsi" -/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" -/include/ "omap36xx-clocks.dtsi" |