1 files changed, 0 insertions, 152 deletions
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
deleted file mode 100644
index 425081201fd4..000000000000
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
- */
-
-#include "omap3-gta04.dtsi"
-
-/ {
-	model = "Goldelico GTA04A5/Letux 2804";
-
-	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
-	};
-
-	wlan_en: wlan_en_regulator {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_pins>;
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
-
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pps_pins>;
-
-		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
-	};
-
-};
-
-&gpio5 {
-	irda-en-hog {
-		gpio-hog;
-		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
-		output-high;	/* activate gpio_175 to disable IrDA receiver */
-	};
-};
-
-&omap3_pmx_core {
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
-		>;
-	};
-
-	wlan_irq_pin: pinmux_wlan_irq_pin {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
-		>;
-	};
-
-	irda_pins: pinmux_irda {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
-		>;
-	};
-
-	pps_pins: pinmux_pps_pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
-		>;
-	};
-
-	bno050_pins: pinmux-bno050-pins {
-		pinctrl-single,pins = <
-			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT | MUX_MODE4) /* gpin113 */
-		>;
-	};
-};
-
-/*
- * for WL183x module see
- * Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
- */
-
-&wifi_pwrseq {
-	/delete-property/ reset-gpios;
-};
-
-&mmc2 {
-	vmmc-supply = <&wlan_en>;
-	bus-width = <4>;
-	cap-power-off-card;
-	non-removable;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wlan_irq_pin>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/delete-property/ mmc-pwrseq;
-
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1837";
-		reg = <2>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
-		ref-clock-frequency = <26000000>;
-	};
-};
-
-&i2c2 {
-	/delete-node/ bmp085@77;
-	/delete-node/ bma180@41;
-	/delete-node/ itg3200@68;
-	/delete-node/ hmc5843@1e;
-
-	gyrometer@69 {
-		compatible = "bosch,bmg160";
-		reg = <0x69>;
-	};
-
-	accelerometer@10 {
-		compatible = "bosch,bmc150_accel";
-		reg = <0x10>;
-	};
-
-	magnetometer@12 {
-		compatible = "bosch,bmc150_magn";
-		reg = <0x12>;
-	};
-
-	bme280@76 {
-		compatible = "bosch,bme280";
-		reg = <0x76>;
-		vdda-supply = <&vio>;
-		vddd-supply = <&vio>;
-	};
-
-	imu@29 {
-		compatible = "bosch,bno055";
-		reg = <0x29>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bno050_pins>;
-		/* interrupt at &gpio4 17 */
-	};
-};