diff options
Diffstat (limited to 'arch/arm/boot/dts/nspire.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/nspire.dtsi | 203 |
1 files changed, 0 insertions, 203 deletions
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi deleted file mode 100644 index bb240e6a3a6f..000000000000 --- a/arch/arm/boot/dts/nspire.dtsi +++ /dev/null @@ -1,203 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/boot/nspire.dtsi - * - * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> - */ - -/ { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - cpus { - cpu@0 { - compatible = "arm,arm926ej-s"; - }; - }; - - bootrom: bootrom@0 { - reg = <0x00000000 0x80000>; - }; - - sram: sram@a4000000 { - device = "memory"; - reg = <0xa4000000 0x20000>; - }; - - timer_clk: timer_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - }; - - base_clk: base_clk { - #clock-cells = <0>; - reg = <0x900b0024 0x4>; - }; - - ahb_clk: ahb_clk { - #clock-cells = <0>; - reg = <0x900b0024 0x4>; - clocks = <&base_clk>; - }; - - apb_pclk: apb_pclk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&ahb_clk>; - }; - - usb_phy: usb_phy { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - vbus_reg: vbus_reg { - compatible = "regulator-fixed"; - - regulator-name = "USB VBUS output"; - regulator-type = "voltage"; - - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - ahb { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - spi: spi@a9000000 { - reg = <0xa9000000 0x1000>; - }; - - usb0: usb@b0000000 { - compatible = "lsi,zevio-usb"; - reg = <0xb0000000 0x1000>; - interrupts = <8>; - - usb-phy = <&usb_phy>; - vbus-supply = <&vbus_reg>; - }; - - usb1: usb@b4000000 { - reg = <0xb4000000 0x1000>; - interrupts = <9>; - status = "disabled"; - }; - - lcd: lcd@c0000000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0xc0000000 0x1000>; - interrupts = <21>; - - /* - * We assume the same clock is fed to APB and CLCDCLK. - * There is some code to scale the clock down by a factor - * 48 for the display so likely the frequency to the - * display is 1MHz and the CLCDCLK is 48 MHz. - */ - clocks = <&apb_pclk>, <&apb_pclk>; - clock-names = "clcdclk", "apb_pclk"; - }; - - adc: adc@c4000000 { - reg = <0xc4000000 0x1000>; - interrupts = <11>; - }; - - tdes: crypto@c8010000 { - reg = <0xc8010000 0x1000>; - }; - - sha256: crypto@cc000000 { - reg = <0xcc000000 0x1000>; - }; - - apb@90000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - clock-ranges; - ranges; - - gpio: gpio@90000000 { - compatible = "lsi,zevio-gpio"; - reg = <0x90000000 0x1000>; - interrupts = <7>; - gpio-controller; - #gpio-cells = <2>; - }; - - fast_timer: timer@90010000 { - reg = <0x90010000 0x1000>; - interrupts = <17>; - }; - - uart: serial@90020000 { - reg = <0x90020000 0x1000>; - interrupts = <1>; - }; - - timer0: timer@900c0000 { - reg = <0x900c0000 0x1000>; - clocks = <&timer_clk>, <&timer_clk>, - <&timer_clk>; - clock-names = "timer0clk", "timer1clk", - "apb_pclk"; - }; - - timer1: timer@900d0000 { - reg = <0x900d0000 0x1000>; - interrupts = <19>; - clocks = <&timer_clk>, <&timer_clk>, - <&timer_clk>; - clock-names = "timer0clk", "timer1clk", - "apb_pclk"; - }; - - watchdog: watchdog@90060000 { - compatible = "arm,amba-primecell"; - reg = <0x90060000 0x1000>; - interrupts = <3>; - }; - - rtc: rtc@90090000 { - reg = <0x90090000 0x1000>; - interrupts = <4>; - }; - - misc: misc@900a0000 { - reg = <0x900a0000 0x1000>; - }; - - pwr: pwr@900b0000 { - reg = <0x900b0000 0x1000>; - interrupts = <15>; - }; - - keypad: input@900e0000 { - compatible = "ti,nspire-keypad"; - reg = <0x900e0000 0x1000>; - interrupts = <16>; - - scan-interval = <1000>; - row-delay = <200>; - - clocks = <&apb_pclk>; - }; - - contrast: contrast@900f0000 { - reg = <0x900f0000 0x1000>; - }; - - led: led@90110000 { - reg = <0x90110000 0x1000>; - }; - }; - }; -}; |