diff options
Diffstat (limited to 'arch/arm/boot/dts/mmp3-dell-ariel.dts')
-rw-r--r-- | arch/arm/boot/dts/mmp3-dell-ariel.dts | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts deleted file mode 100644 index fe6df364a9eb..000000000000 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Dell Wyse 3020 a.k.a. "Ariel" a.k.a. Tx0D (T00D, T10D) - * - * Copyright (C) 2019 Lubomir Rintel <lkundrak@v3.sk> - */ - -/dts-v1/; -#include "mmp3.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Dell Ariel"; - compatible = "dell,wyse-ariel", "marvell,mmp3"; - - aliases { - serial2 = &uart3; - }; - - chosen { - #address-cells = <0x1>; - #size-cells = <0x1>; - ranges; - bootargs = "earlyprintk=ttyS2,115200 console=ttyS2,115200"; - }; - - memory@0 { - available = <0x7f700000 0x7ff00000 0x00000000 0x7f600000>; - reg = <0x0 0x80000000>; - device_type = "memory"; - }; - - ec_input_spi: spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - num-chipselects = <0>; - sck-gpios = <&gpio 55 GPIO_ACTIVE_HIGH>; - miso-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart3 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&usb_otg0 { - status = "okay"; -}; - -&usb_otg_phy0 { - status = "okay"; -}; - -&hsic0 { - status = "okay"; - - usb1@1 { - compatible = "usb424,2640"; - reg = <0x01>; - #address-cells = <0x01>; - #size-cells = <0x00>; - - mass-storage@1 { - compatible = "usb424,4040"; - reg = <0x01>; - status = "disabled"; - }; - }; -}; - -&hsic_phy0 { - status = "okay"; - reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>; -}; - -&mmc3 { - status = "okay"; - max-frequency = <50000000>; - status = "okay"; - bus-width = <8>; - non-removable; - cap-mmc-highspeed; -}; - -&twsi1 { - status = "okay"; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - status = "okay"; - }; -}; - -&twsi3 { - status = "okay"; -}; - -&twsi4 { - status = "okay"; - - embedded-controller@58 { - compatible = "dell,wyse-ariel-ec", "ene,kb3930"; - reg = <0x58>; - system-power-controller; - - off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>, - <&gpio 127 GPIO_ACTIVE_HIGH>; - }; -}; - -&ssp1 { - status = "okay"; - cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; - - firmware-flash@0 { - compatible = "winbond,w25q32", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -&ec_input_spi { - status = "okay"; - cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; - - power-button@0 { - reg = <0>; - interrupt-parent = <&gpio>; - interrupts = <60 IRQ_TYPE_EDGE_RISING>; - compatible = "dell,wyse-ariel-ec-input", "ene,kb3930-input"; - spi-max-frequency = <33000000>; - }; -}; - -&gpu_2d { - status = "okay"; -}; - -&gpu_3d { - status = "okay"; -}; |