diff options
Diffstat (limited to 'arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts')
| -rw-r--r-- | arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts | 277 |
1 files changed, 0 insertions, 277 deletions
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts deleted file mode 100644 index 55ea87870af3..000000000000 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ /dev/null @@ -1,277 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * OLPC XO 1.75 Laptop. - * - * Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk> - */ - -/dts-v1/; -#include "mmp2.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/clock/marvell,mmp2-audio.h> - -/ { - model = "OLPC XO-1.75"; - compatible = "olpc,xo-1.75", "mrvl,mmp2"; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@1fc00000 { - compatible = "simple-framebuffer"; - reg = <0x1fc00000 (1200 * 900 * 2)>; - width = <1200>; - height = <900>; - stride = <(1200 * 2)>; - format = "r5g6b5"; - clocks = <&soc_clocks MMP2_CLK_DISP0_LCDC>, - <&soc_clocks MMP2_CLK_DISP0>; - }; - }; - - memory@0 { - available = <0xcf000 0x1ef31000 0x1000 0xbf000>; - reg = <0x0 0x20000000>; - device_type = "memory"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - lid { - label = "Lid"; - gpios = <&gpio 129 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_LID>; - wakeup-source; - }; - - tablet_mode { - label = "E-Book Mode"; - gpios = <&gpio 128 GPIO_ACTIVE_LOW>; - linux,input-type = <EV_SW>; - linux,code = <SW_TABLET_MODE>; - wakeup-source; - }; - }; - - i2c { - compatible = "i2c-gpio"; - sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - i2c-gpio,timeout-ms = <1000>; - status = "okay"; - - camera@21 { - compatible = "ovti,ov7670"; - reg = <0x21>; - reset-gpios = <&gpio 102 GPIO_ACTIVE_LOW>; - powerdown-gpios = <&gpio 150 GPIO_ACTIVE_LOW>; - clocks = <&camera0>; - clock-names = "xclk"; - - port { - ov7670_0: endpoint { - hsync-active = <1>; - vsync-active = <1>; - remote-endpoint = <&camera0_0>; - }; - }; - }; - }; - - battery { - compatible = "olpc,xo1.5-battery", "olpc,xo1-battery"; - }; - - wlan_reg: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "wlan"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio 34 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - wlan_pwrseq: pwrseq0 { - compatible = "mmc-pwrseq-sd8787"; - powerdown-gpios = <&gpio 57 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>; - }; - - sound-card { - compatible = "audio-graph-card"; - label = "OLPC XO"; - dais = <&sspa0_dai>; - routing = "Headphones", "HPOL", - "Headphones", "HPOR", - "MIC2", "Mic Jack"; - widgets = "Headphone", "Headphones", "Microphone", "Mic Jack"; - hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>; - mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>; - }; - - soc { - axi@d4200000 { - ap-sp@d4290000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "olpc,ap-sp"; - interrupts = <40>; - reg = <0xd4290000 0x1000>; - data-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>; - clk-gpios = <&gpio 71 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - }; - }; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&rtc { - status = "okay"; -}; - -&usb_phy0 { - status = "okay"; -}; - -&usb_otg0 { - status = "okay"; -}; - -&mmc1 { - clock-frequency = <50000000>; - no-1-8-v; - mrvl,clk-delay-cycles = <31>; - broken-cd; - status = "okay"; -}; - -&mmc2 { - clock-frequency = <50000000>; - no-1-8-v; - bus-width = <4>; - non-removable; - broken-cd; - wakeup-source; - keep-power-in-suspend; - mmc-pwrseq = <&wlan_pwrseq>; - vmmc-supply = <&wlan_reg>; - status = "okay"; -}; - -&mmc3 { - clock-frequency = <50000000>; - no-1-8-v; - bus-width = <8>; - non-removable; - broken-cd; - mrvl,clk-delay-cycles = <31>; - status = "okay"; -}; - -&twsi1 { - status = "okay"; - - audio-codec@1a { - compatible = "realtek,alc5631"; - reg = <0x1a>; - status = "okay"; - - port { - rt5631_0: endpoint { - mclk-fs = <256>; - clocks = <&audio_clk MMP2_CLK_AUDIO_SYSCLK>; - remote-endpoint = <&sspa0_0>; - }; - }; - }; -}; - -&twsi2 { - status = "okay"; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - status = "okay"; - }; -}; - -&twsi6 { - status = "okay"; - - accelerometer@1d { - compatible = "st,lis331dlh", "st,lis3lv02d"; - reg = <0x1d>; - status = "okay"; - }; -}; - -&ssp3 { - #address-cells = <0>; - spi-slave; - status = "okay"; - ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; - - slave { - compatible = "olpc,xo1.75-ec"; - spi-cpha; - cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; - }; -}; - -&camera0 { - status = "okay"; - - port { - camera0_0: endpoint { - remote-endpoint = <&ov7670_0>; - }; - }; -}; - -&asram { - status = "okay"; -}; - -&adma0 { - status = "okay"; -}; - -&audio_clk { - status = "okay"; -}; - -&sspa0 { - status = "okay"; - dmas = <&adma0 0>, <&adma0 1>; - dma-names = "tx", "rx"; - - sspa0_dai: port { - sspa0_0: endpoint { - remote-endpoint = <&rt5631_0>; - frame-master; - bitclock-master; - dai-format = "i2s"; - }; - }; -}; - -&gpu { - status = "okay"; -}; |