diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8m2-mxiii-plus.dts')
-rw-r--r-- | arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 293 |
1 files changed, 0 insertions, 293 deletions
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts deleted file mode 100644 index aa4d4bf70629..000000000000 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ /dev/null @@ -1,293 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Oleg Ivanov <balbes-150@yandex.ru> - * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - */ - -/dts-v1/; - -#include "meson8m2.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Tronsmart MXIII Plus"; - compatible = "tronsmart,mxiii-plus", "amlogic,meson8m2"; - - aliases { - ethernet0 = ðmac; - i2c0 = &i2c_AO; - serial0 = &uart_AO; - mmc0 = &sd_card_slot; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = <KEY_FN>; - press-threshold-microvolt = <10000>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - - pinctrl-0 = <&xtal_32k_out_pins>; - pinctrl-names = "default"; - - reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>, - <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>; - - clocks = <&xtal_32k_out>; - clock-names = "ext_clock"; - }; - - vcc_3v3: regulator-vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - xtal_32k_out: xtal-32k-out-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xtal_32k_out"; - }; -}; - -&cpu0 { - cpu-supply = <&vcck>; -}; - -ðmac { - status = "okay"; - - pinctrl-0 = <ð_rgmii_pins>; - pinctrl-names = "default"; - - phy-handle = <ð_phy0>; - phy-mode = "rgmii-id"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&ir_receiver { - status = "okay"; - pinctrl-0 = <&ir_recv_pins>; - pinctrl-names = "default"; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_pins>; - pinctrl-names = "default"; - - pmic@32 { - compatible = "ricoh,rn5t618"; - reg = <0x32>; - system-power-controller; - - regulators { - vcck: DCDC1 { - regulator-name = "VCCK"; - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - vddee: DCDC2 { - /* the output is also used as VDDAO */ - regulator-name = "VDD_EE"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - DCDC3 { - regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO1 { - regulator-name = "VDDIO_AO28"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-boot-on; - regulator-always-on; - }; - - vddio_ao1v8: LDO2 { - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO3 { - regulator-name = "VCC1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO4 { - regulator-name = "VCC2V8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO5 { - regulator-name = "AVDD1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - LDORTC1 { - regulator-name = "VDD_LDO"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-boot-on; - regulator-always-on; - }; - - LDORTC2 { - regulator-name = "RTC_0V9"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&mali { - mali-supply = <&vddee>; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao1v8>; -}; - -/* SDIO wifi */ -&sdhc { - status = "okay"; - - pinctrl-0 = <&sdxc_a_pins>; - pinctrl-names = "default"; - - bus-width = <4>; - max-frequency = <50000000>; - - disable-wp; - non-removable; - cap-mmc-highspeed; - cap-sd-highspeed; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_3v3>; -}; - -&sdio { - status = "okay"; - - pinctrl-0 = <&sd_b_pins>; - pinctrl-names = "default"; - - /* SD card */ - sd_card_slot: slot@1 { - compatible = "mmc-slot"; - reg = <1>; - status = "okay"; - - bus-width = <4>; - no-sdio; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_3v3>; - }; -}; - -/* connected to the Bluetooth module */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm20702a1"; - shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; - -&usb0_phy { - status = "okay"; -}; - -&usb1_phy { - status = "okay"; -}; |