aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/meson8.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/meson8.dtsi')
-rw-r--r--arch/arm/boot/dts/meson8.dtsi806
1 files changed, 0 insertions, 806 deletions
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
deleted file mode 100644
index 4f22ab451aae..000000000000
--- a/arch/arm/boot/dts/meson8.dtsi
+++ /dev/null
@@ -1,806 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright 2014 Carlo Caione <carlo@caione.org>
- */
-
-#include <dt-bindings/clock/meson8-ddr-clkc.h>
-#include <dt-bindings/clock/meson8b-clkc.h>
-#include <dt-bindings/gpio/meson8-gpio.h>
-#include <dt-bindings/power/meson8-power.h>
-#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
-#include <dt-bindings/reset/amlogic,meson8b-reset.h>
-#include <dt-bindings/thermal/thermal.h>
-#include "meson.dtsi"
-
-/ {
- model = "Amlogic Meson8 SoC";
- compatible = "amlogic,meson8";
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@200 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x200>;
- enable-method = "amlogic,meson8-smp";
- resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPUCLK>;
- #cooling-cells = <2>; /* min followed by max */
- };
-
- cpu1: cpu@201 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x201>;
- enable-method = "amlogic,meson8-smp";
- resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPUCLK>;
- #cooling-cells = <2>; /* min followed by max */
- };
-
- cpu2: cpu@202 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x202>;
- enable-method = "amlogic,meson8-smp";
- resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPUCLK>;
- #cooling-cells = <2>; /* min followed by max */
- };
-
- cpu3: cpu@203 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
- reg = <0x203>;
- enable-method = "amlogic,meson8-smp";
- resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
- operating-points-v2 = <&cpu_opp_table>;
- clocks = <&clkc CLKID_CPUCLK>;
- #cooling-cells = <2>; /* min followed by max */
- };
- };
-
- cpu_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-96000000 {
- opp-hz = /bits/ 64 <96000000>;
- opp-microvolt = <825000>;
- };
- opp-192000000 {
- opp-hz = /bits/ 64 <192000000>;
- opp-microvolt = <825000>;
- };
- opp-312000000 {
- opp-hz = /bits/ 64 <312000000>;
- opp-microvolt = <825000>;
- };
- opp-408000000 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <825000>;
- };
- opp-504000000 {
- opp-hz = /bits/ 64 <504000000>;
- opp-microvolt = <825000>;
- };
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <850000>;
- };
- opp-720000000 {
- opp-hz = /bits/ 64 <720000000>;
- opp-microvolt = <850000>;
- };
- opp-816000000 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <875000>;
- };
- opp-1008000000 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <925000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <975000>;
- };
- opp-1416000000 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1025000>;
- };
- opp-1608000000 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1100000>;
- };
- opp-1800000000 {
- status = "disabled";
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1125000>;
- };
- opp-1992000000 {
- status = "disabled";
- opp-hz = /bits/ 64 <1992000000>;
- opp-microvolt = <1150000>;
- };
- };
-
- gpu_opp_table: opp-table-gpu {
- compatible = "operating-points-v2";
-
- opp-182142857 {
- opp-hz = /bits/ 64 <182142857>;
- opp-microvolt = <1150000>;
- };
- opp-318750000 {
- opp-hz = /bits/ 64 <318750000>;
- opp-microvolt = <1150000>;
- };
- opp-425000000 {
- opp-hz = /bits/ 64 <425000000>;
- opp-microvolt = <1150000>;
- };
- opp-510000000 {
- opp-hz = /bits/ 64 <510000000>;
- opp-microvolt = <1150000>;
- };
- opp-637500000 {
- opp-hz = /bits/ 64 <637500000>;
- opp-microvolt = <1150000>;
- turbo-mode;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- /* 2 MiB reserved for Hardware ROM Firmware? */
- hwrom@0 {
- reg = <0x0 0x200000>;
- no-map;
- };
-
- /*
- * 1 MiB reserved for the "ARM Power Firmware": this is ARM
- * code which is responsible for system suspend. It loads a
- * piece of ARC code ("arc_power" in the vendor u-boot tree)
- * into SRAM, executes that and shuts down the (last) ARM core.
- * The arc_power firmware then checks various wakeup sources
- * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
- * simply the power key) and re-starts the ARM core once it
- * detects a wakeup request.
- */
- power-firmware@4f00000 {
- reg = <0x4f00000 0x100000>;
- no-map;
- };
- };
-
- thermal-zones {
- soc {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
- thermal-sensors = <&thermal_sensor>;
-
- cooling-maps {
- map0 {
- trip = <&soc_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&soc_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
-
- trips {
- soc_passive: soc-passive {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- soc_hot: soc-hot {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "hot";
- };
-
- soc_critical: soc-critical {
- temperature = <110000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
- };
- };
-
- mmcbus: bus@c8000000 {
- compatible = "simple-bus";
- reg = <0xc8000000 0x8000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xc8000000 0x8000>;
-
- ddr_clkc: clock-controller@400 {
- compatible = "amlogic,meson8-ddr-clkc";
- reg = <0x400 0x20>;
- clocks = <&xtal>;
- clock-names = "xtal";
- #clock-cells = <1>;
- };
-
- dmcbus: bus@6000 {
- compatible = "simple-bus";
- reg = <0x6000 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x6000 0x400>;
-
- canvas: video-lut@20 {
- compatible = "amlogic,meson8-canvas",
- "amlogic,canvas";
- reg = <0x20 0x14>;
- };
- };
- };
-
- apb: bus@d0000000 {
- compatible = "simple-bus";
- reg = <0xd0000000 0x200000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0xd0000000 0x200000>;
-
- mali: gpu@c0000 {
- compatible = "amlogic,meson8-mali", "arm,mali-450";
- reg = <0xc0000 0x40000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "gp", "gpmmu", "pp", "pmu",
- "pp0", "ppmmu0", "pp1", "ppmmu1",
- "pp2", "ppmmu2", "pp4", "ppmmu4",
- "pp5", "ppmmu5", "pp6", "ppmmu6";
- resets = <&reset RESET_MALI>;
-
- clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
- clock-names = "bus", "core";
-
- assigned-clocks = <&clkc CLKID_MALI>;
- assigned-clock-rates = <318750000>;
-
- operating-points-v2 = <&gpu_opp_table>;
- #cooling-cells = <2>; /* min followed by max */
- };
- };
-}; /* end of / */
-
-&aiu {
- compatible = "amlogic,aiu-meson8", "amlogic,aiu";
- clocks = <&clkc CLKID_AIU_GLUE>,
- <&clkc CLKID_I2S_OUT>,
- <&clkc CLKID_AOCLK_GATE>,
- <&clkc CLKID_CTS_AMCLK>,
- <&clkc CLKID_MIXER_IFACE>,
- <&clkc CLKID_IEC958>,
- <&clkc CLKID_IEC958_GATE>,
- <&clkc CLKID_CTS_MCLK_I958>,
- <&clkc CLKID_CTS_I958>;
- clock-names = "pclk",
- "i2s_pclk",
- "i2s_aoclk",
- "i2s_mclk",
- "i2s_mixer",
- "spdif_pclk",
- "spdif_aoclk",
- "spdif_mclk",
- "spdif_mclk_sel";
- resets = <&reset RESET_AIU>;
-};
-
-&aobus {
- pmu: pmu@e0 {
- compatible = "amlogic,meson8-pmu", "syscon";
- reg = <0xe0 0x18>;
- };
-
- pinctrl_aobus: pinctrl@84 {
- compatible = "amlogic,meson8-aobus-pinctrl";
- reg = <0x84 0xc>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio_ao: ao-bank@14 {
- reg = <0x14 0x4>,
- <0x2c 0x4>,
- <0x24 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_aobus 0 0 16>;
- };
-
- i2s_am_clk_pins: i2s-am-clk-out {
- mux {
- groups = "i2s_am_clk_out_ao";
- function = "i2s_ao";
- bias-disable;
- };
- };
-
- i2s_out_ao_clk_pins: i2s-ao-clk-out {
- mux {
- groups = "i2s_ao_clk_out_ao";
- function = "i2s_ao";
- bias-disable;
- };
- };
-
- i2s_out_lr_clk_pins: i2s-lr-clk-out {
- mux {
- groups = "i2s_lr_clk_out_ao";
- function = "i2s_ao";
- bias-disable;
- };
- };
-
- i2s_out_ch01_ao_pins: i2s-out-ch01 {
- mux {
- groups = "i2s_out_ch01_ao";
- function = "i2s_ao";
- bias-disable;
- };
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- bias-disable;
- };
- };
-
- i2c_ao_pins: i2c_mst_ao {
- mux {
- groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
- function = "i2c_mst_ao";
- bias-disable;
- };
- };
-
- ir_recv_pins: remote {
- mux {
- groups = "remote_input";
- function = "remote";
- bias-disable;
- };
- };
-
- pwm_f_ao_pins: pwm-f-ao {
- mux {
- groups = "pwm_f_ao";
- function = "pwm_f_ao";
- bias-disable;
- };
- };
- };
-};
-
-&ao_arc_rproc {
- compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
- amlogic,secbus2 = <&secbus2>;
- sram = <&ao_arc_sram>;
- resets = <&reset RESET_MEDIA_CPU>;
- clocks = <&clkc CLKID_AO_MEDIA_CPU>;
-};
-
-&cbus {
- reset: reset-controller@4404 {
- compatible = "amlogic,meson8b-reset";
- reg = <0x4404 0x9c>;
- #reset-cells = <1>;
- };
-
- analog_top: analog-top@81a8 {
- compatible = "amlogic,meson8-analog-top", "syscon";
- reg = <0x81a8 0x14>;
- };
-
- pwm_ef: pwm@86c0 {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
- reg = <0x86c0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- clock-measure@8758 {
- compatible = "amlogic,meson8-clk-measure";
- reg = <0x8758 0x1c>;
- };
-
- pinctrl_cbus: pinctrl@9880 {
- compatible = "amlogic,meson8-cbus-pinctrl";
- reg = <0x9880 0x10>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio: banks@80b0 {
- reg = <0x80b0 0x28>,
- <0x80e8 0x18>,
- <0x8120 0x18>,
- <0x8030 0x30>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_cbus 0 0 120>;
- };
-
- sd_a_pins: sd-a {
- mux {
- groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
- "sd_d3_a", "sd_clk_a", "sd_cmd_a";
- function = "sd_a";
- bias-disable;
- };
- };
-
- sd_b_pins: sd-b {
- mux {
- groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
- "sd_d3_b", "sd_clk_b", "sd_cmd_b";
- function = "sd_b";
- bias-disable;
- };
- };
-
- sd_c_pins: sd-c {
- mux {
- groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
- "sd_d3_c", "sd_clk_c", "sd_cmd_c";
- function = "sd_c";
- bias-disable;
- };
- };
-
- sdxc_a_pins: sdxc-a {
- mux {
- groups = "sdxc_d0_a", "sdxc_d13_a",
- "sdxc_clk_a", "sdxc_cmd_a";
- function = "sdxc_a";
- bias-pull-up;
- };
- };
-
- sdxc_b_pins: sdxc-b {
- mux {
- groups = "sdxc_d0_b", "sdxc_d13_b",
- "sdxc_clk_b", "sdxc_cmd_b";
- function = "sdxc_b";
- bias-pull-up;
- };
- };
-
- spdif_out_pins: spdif-out {
- mux {
- groups = "spdif_out";
- function = "spdif";
- bias-disable;
- };
- };
-
- spi_nor_pins: nor {
- mux {
- groups = "nor_d", "nor_q", "nor_c", "nor_cs";
- function = "nor";
- bias-disable;
- };
- };
-
- eth_pins: ethernet {
- mux {
- groups = "eth_tx_clk_50m", "eth_tx_en",
- "eth_txd1", "eth_txd0",
- "eth_rx_clk_in", "eth_rx_dv",
- "eth_rxd1", "eth_rxd0", "eth_mdio",
- "eth_mdc";
- function = "ethernet";
- bias-disable;
- };
- };
-
- pwm_e_pins: pwm-e {
- mux {
- groups = "pwm_e";
- function = "pwm_e";
- bias-disable;
- };
- };
-
- uart_a1_pins: uart-a1 {
- mux {
- groups = "uart_tx_a1",
- "uart_rx_a1";
- function = "uart_a";
- bias-disable;
- };
- };
-
- uart_a1_cts_rts_pins: uart-a1-cts-rts {
- mux {
- groups = "uart_cts_a1",
- "uart_rts_a1";
- function = "uart_a";
- bias-disable;
- };
- };
-
- xtal_32k_out_pins: xtal-32k-out {
- mux {
- groups = "xtal_32k_out";
- function = "xtal";
- bias-disable;
- };
- };
- };
-};
-
-&ahb_sram {
- ao_arc_sram: ao-arc-sram@0 {
- compatible = "amlogic,meson8-ao-arc-sram";
- reg = <0x0 0x8000>;
- pool;
- };
-
- smp-sram@1ff80 {
- compatible = "amlogic,meson8-smp-sram";
- reg = <0x1ff80 0x8>;
- };
-};
-
-&efuse {
- compatible = "amlogic,meson8-efuse";
- clocks = <&clkc CLKID_EFUSE>;
- clock-names = "core";
-
- temperature_calib: calib@1f4 {
- /* only the upper two bytes are relevant */
- reg = <0x1f4 0x4>;
- };
-};
-
-&ethmac {
- clocks = <&clkc CLKID_ETH>;
- clock-names = "stmmaceth";
-
- power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
-};
-
-&gpio_intc {
- compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
- status = "okay";
-};
-
-&hhi {
- clkc: clock-controller {
- compatible = "amlogic,meson8-clkc";
- clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
- clock-names = "xtal", "ddr_pll";
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pwrc: power-controller {
- compatible = "amlogic,meson8-pwrc";
- #power-domain-cells = <1>;
- amlogic,ao-sysctrl = <&pmu>;
- clocks = <&clkc CLKID_VPU>;
- clock-names = "vpu";
- assigned-clocks = <&clkc CLKID_VPU>;
- assigned-clock-rates = <364285714>;
- };
-};
-
-&hwrng {
- compatible = "amlogic,meson8-rng", "amlogic,meson-rng";
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
-};
-
-&i2c_AO {
- clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_A {
- clocks = <&clkc CLKID_CLK81>;
-};
-
-&i2c_B {
- clocks = <&clkc CLKID_CLK81>;
-};
-
-&L2 {
- arm,data-latency = <3 3 3>;
- arm,tag-latency = <2 2 2>;
- arm,filter-ranges = <0x100000 0xc0000000>;
- prefetch-data = <1>;
- prefetch-instr = <1>;
- arm,prefetch-offset = <7>;
- arm,double-linefill = <1>;
- arm,prefetch-drop = <1>;
- arm,shared-override;
-};
-
-&periph {
- scu@0 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x0 0x100>;
- };
-
- timer@200 {
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x200 0x20>;
- interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
- clocks = <&clkc CLKID_PERIPH>;
-
- /*
- * the arm_global_timer driver currently does not handle clock
- * rate changes. Keep it disabled for now.
- */
- status = "disabled";
- };
-
- timer@600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0x600 0x20>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
- clocks = <&clkc CLKID_PERIPH>;
- };
-};
-
-&pwm_ab {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
-};
-
-&pwm_cd {
- compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm";
-};
-
-&rtc {
- compatible = "amlogic,meson8-rtc";
- resets = <&reset RESET_RTC>;
-};
-
-&saradc {
- compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
- clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
- clock-names = "clkin", "core";
- amlogic,hhi-sysctrl = <&hhi>;
- nvmem-cells = <&temperature_calib>;
- nvmem-cell-names = "temperature_calib";
-};
-
-&sdhc {
- compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
- clocks = <&xtal>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV5>,
- <&clkc CLKID_SDHC>;
- clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
-};
-
-&secbus {
- secbus2: system-controller@4000 {
- compatible = "amlogic,meson8-secbus2", "syscon";
- reg = <0x4000 0x2000>;
- };
-};
-
-&sdio {
- compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
- clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
- clock-names = "core", "clkin";
-};
-
-&spifc {
- clocks = <&clkc CLKID_CLK81>;
-};
-
-&timer_abcde {
- clocks = <&xtal>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "pclk";
-};
-
-&uart_AO {
- compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
- clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_A {
- compatible = "amlogic,meson8-uart";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_B {
- compatible = "amlogic,meson8-uart";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&uart_C {
- compatible = "amlogic,meson8-uart";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
- clock-names = "xtal", "pclk", "baud";
-};
-
-&usb0 {
- compatible = "amlogic,meson8-usb", "snps,dwc2";
- clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
- clock-names = "otg";
-};
-
-&usb1 {
- compatible = "amlogic,meson8-usb", "snps,dwc2";
- clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
- clock-names = "otg";
-};
-
-&usb0_phy {
- compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
- clock-names = "usb_general", "usb";
- resets = <&reset RESET_USB_OTG>;
-};
-
-&usb1_phy {
- compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
- clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
- clock-names = "usb_general", "usb";
- resets = <&reset RESET_USB_OTG>;
-};
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-23 23:09:04 +0000