diff options
Diffstat (limited to 'arch/arm/boot/dts/ls1021a-twr.dts')
-rw-r--r-- | arch/arm/boot/dts/ls1021a-twr.dts | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts deleted file mode 100644 index f5c03871b205..000000000000 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright 2013-2014 Freescale Semiconductor, Inc. - * Copyright 2018 NXP - */ - -/dts-v1/; -#include "ls1021a.dtsi" - -/ { - model = "LS1021A TWR Board"; - compatible = "fsl,ls1021a-twr", "fsl,ls1021a"; - - aliases { - enet2_rgmii_phy = &rgmii_phy1; - enet0_sgmii_phy = &sgmii_phy2; - enet1_sgmii_phy = &sgmii_phy0; - }; - - sys_mclk: clock-mclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - reg_3p3v: regulator { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,widgets = - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack", - "Speaker", "Speaker Ext", - "Line", "Line In Jack"; - simple-audio-card,routing = - "MIC_IN", "Microphone Jack", - "Microphone Jack", "Mic Bias", - "LINE_IN", "Line In Jack", - "Headphone Jack", "HP_OUT", - "Speaker Ext", "LINE_OUT"; - - simple-audio-card,cpu { - sound-dai = <&sai1>; - frame-master; - bitclock-master; - }; - - simple-audio-card,codec { - sound-dai = <&codec>; - frame-master; - bitclock-master; - }; - }; - - panel: panel { - compatible = "nec,nl4827hc19-05b"; - - port { - panel_in: endpoint { - remote-endpoint = <&dcu_out>; - }; - }; - }; -}; - -&dcu { - status = "okay"; - - port { - dcu_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; -}; - -&dspi1 { - bus-num = <0>; - status = "okay"; - - dspiflash: s25fl064k@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25fl064k"; - spi-max-frequency = <16000000>; - spi-cpol; - spi-cpha; - reg = <0>; - }; -}; - -&enet0 { - tbi-handle = <&tbi0>; - phy-handle = <&sgmii_phy2>; - phy-connection-type = "sgmii"; - status = "okay"; -}; - -&enet1 { - tbi-handle = <&tbi1>; - phy-handle = <&sgmii_phy0>; - phy-connection-type = "sgmii"; - status = "okay"; -}; - -&enet2 { - phy-handle = <&rgmii_phy1>; - phy-connection-type = "rgmii-id"; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - ina220@40 { - compatible = "ti,ina220"; - reg = <0x40>; - shunt-resistor = <1000>; - }; - - ina220@41 { - compatible = "ti,ina220"; - reg = <0x41>; - shunt-resistor = <1000>; - }; - -}; - -&i2c1 { - status = "okay"; - codec: sgtl5000@a { - #sound-dai-cells = <0>; - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - VDDA-supply = <®_3p3v>; - VDDIO-supply = <®_3p3v>; - clocks = <&sys_mclk>; - }; -}; - -&ifc { - #address-cells = <2>; - #size-cells = <1>; - /* NOR Flash on board */ - ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; - status = "okay"; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - big-endian; - bank-width = <2>; - device-width = <1>; - }; -}; - -&lpuart0 { - status = "okay"; -}; - -&mdio0 { - sgmii_phy0: ethernet-phy@0 { - reg = <0x0>; - }; - rgmii_phy1: ethernet-phy@1 { - reg = <0x1>; - }; - sgmii_phy2: ethernet-phy@2 { - reg = <0x2>; - }; - tbi0: tbi-phy@1f { - reg = <0x1f>; - device_type = "tbi-phy"; - }; -}; - -&mdio1 { - tbi1: tbi-phy@1f { - reg = <0x1f>; - device_type = "tbi-phy"; - }; -}; - -&esdhc { - status = "okay"; -}; - -&qspi { - status = "okay"; - - n25q128a130: flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - }; -}; - -&sai1 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&can2 { - status = "disabled"; -}; - -&can3 { - status = "disabled"; -}; |