diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-linksys-viper.dts')
-rw-r--r-- | arch/arm/boot/dts/kirkwood-linksys-viper.dts | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/arch/arm/boot/dts/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/kirkwood-linksys-viper.dts deleted file mode 100644 index 27fd6e2337d5..000000000000 --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-viper.dts - Device Tree file for Linksys viper (E4200v2 / EA4500) - * - * (c) 2013 Jonas Gorski <jogo@openwrt.org> - * (c) 2013 Deutsche Telekom Innovation Laboratories - * (c) 2014 Luka Perkov <luka@openwrt.org> - * (c) 2014 Randy C. Will <randall.will@gmail.com> - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Linksys Viper (E4200v2 / EA4500)"; - compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; - pinctrl-names = "default"; - - wps { - label = "WPS Button"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; - pinctrl-names = "default"; - - white-health { - label = "viper:white:health"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - white-pulse { - label = "viper:white:pulse"; - gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&pinctrl { - pmx_led_white_health: pmx-led-white-health { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - pmx_led_white_pulse: pmx-led-white-pulse { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - pmx_btn_wps: pmx-btn-wps { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; -}; - -&nand { - status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u_env"; - reg = <0x80000 0x20000>; - }; - - partition@a0000 { - label = "s_env"; - reg = <0xA0000 0x20000>; - }; - - partition@200000 { - label = "kernel"; - reg = <0x200000 0x2A0000>; - }; - - partition@4a0000 { - label = "rootfs"; - reg = <0x4A0000 0x1760000>; - }; - - partition@1c00000 { - label = "alt_kernel"; - reg = <0x1C00000 0x2A0000>; - }; - - partition@1ea0000 { - label = "alt_rootfs"; - reg = <0x1EA0000 0x1760000>; - }; - - partition@3600000 { - label = "syscfg"; - reg = <0x3600000 0x4A00000>; - }; - - partition@c0000 { - label = "unused"; - reg = <0xC0000 0x140000>; - }; - - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&mdio { - status = "okay"; - - switch@10 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <16>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "ethernet1"; - }; - - port@1 { - reg = <1>; - label = "ethernet2"; - }; - - port@2 { - reg = <2>; - label = "ethernet3"; - }; - - port@3 { - reg = <3>; - label = "ethernet4"; - }; - - port@4 { - reg = <4>; - label = "internet"; - }; - - port@5 { - reg = <5>; - phy-mode = "rgmii-id"; - ethernet = <ð0port>; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set - * fixed speed and duplex. - */ -ð0 { - status = "okay"; - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; - phy-mode = "rgmii"; - }; -}; - -/* eth1 is connected to the switch at port 6. However DSA only supports a - * single CPU port. So leave this port disabled to avoid confusion. - */ -ð1 { - status = "disabled"; -}; - -/* There is no battery on the board, so the RTC does not keep - * time when there is no power, making it useless. - */ -&rtc { - status = "disabled"; -}; - |