diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-goflexnet.dts')
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-goflexnet.dts | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts deleted file mode 100644 index d4cb3cd3e2a2..000000000000 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_0: pmx-led_right_cap_0 { - marvell,pins = "mpp38"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_1: pmx-led_right_cap_1 { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_2: pmx-led_right_cap_2 { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_right_cap_3: pmx-led_right_cap_3 { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_0: pmx-led_left_cap_0 { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_1: pmx-led_left_cap_1 { - marvell,pins = "mpp43"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_2: pmx-led_left_cap_2 { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - pmx_led_left_cap_3: pmx-led_left_cap_3 { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - pmx_led_green: pmx-led_green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - pmx_led_orange: pmx-led_orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - - }; - gpio-leds { - compatible = "gpio-leds"; - pinctrl-0 = < &pmx_led_orange - &pmx_led_left_cap_0 &pmx_led_left_cap_1 - &pmx_led_left_cap_2 &pmx_led_left_cap_3 - &pmx_led_right_cap_0 &pmx_led_right_cap_1 - &pmx_led_right_cap_2 &pmx_led_right_cap_3 - >; - pinctrl-names = "default"; - - health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - left0 { - label = "status:white:left0"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - left1 { - label = "status:white:left1"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - left2 { - label = "status:white:left2"; - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; - left3 { - label = "status:white:left3"; - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - right0 { - label = "status:white:right0"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - }; - right1 { - label = "status:white:right1"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - right2 { - label = "status:white:right2"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - right3 { - label = "status:white:right3"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - chip-delay = <40>; - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; - - partition@100000 { - label = "uImage"; - reg = <0x0100000 0x400000>; - }; - - partition@500000 { - label = "pogoplug"; - reg = <0x0500000 0x2000000>; - }; - - partition@2500000 { - label = "root"; - reg = <0x02500000 0xd800000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; |