diff options
Diffstat (limited to 'arch/arm/boot/dts/kirkwood-dir665.dts')
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-dir665.dts | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts new file mode 100644 index 000000000000..786959ee9cbe --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -0,0 +1,278 @@ +/* + * Copyright (C) 2014 Claudio Leite <leitec@staticky.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "D-Link DIR-665"; + compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 =< &pmx_led_usb + &pmx_led_internet_blue + &pmx_led_internet_amber + &pmx_led_5g &pmx_led_status_blue + &pmx_led_wps &pmx_led_status_amber + &pmx_led_24g + &pmx_btn_restart &pmx_btn_wps>; + pinctrl-names = "default"; + + pmx_led_usb: pmx-led-usb { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_led_internet_blue: pmx-led-internet-blue { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_internet_amber: pmx-led-internet-amber { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_5g: pmx-led-5g { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_status_blue: pmx-led-status-blue { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_wps: pmx-led-wps { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_status_amber: pmx-led-status-amber { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_24g: pmx-led-24g { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + pmx_btn_restart: pmx-btn-restart { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_btn_wps: pmx-btn-wps { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + }; + + spi@10600 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l12805d"; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "nvram"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "kernel"; + reg = <0x40000 0x180000>; + }; + + partition@1c0000 { + label = "rootfs"; + reg = <0x1c0000 0xe00000>; + }; + + cal_data: partition@fc0000 { + label = "cal_data"; + reg = <0xfc0000 0x10000>; + read-only; + }; + + partition@fd0000 { + label = "lang_pack"; + reg = <0xfd0000 0x30000>; + read-only; + }; + }; + }; + + serial@12000 { + status = "okay"; + }; + + i2c@11000 { + status = "okay"; + }; + + ehci@50000 { + status = "okay"; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-usb { + label = "dir665:blue:usb"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + blue-internet { + /* Can only be turned on if the Internet + * Ethernet port has Link + */ + label = "dir665:blue:internet"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + amber-internet { + label = "dir665:amber:internet"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + blue-wifi5g { + label = "dir665:blue:5g"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + blue-status { + label = "dir665:blue:status"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + blue-wps { + label = "dir665:blue:wps"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + amber-status { + label = "dir665:amber:status"; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + }; + blue-24g { + label = "dir665:blue:24g"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð0port>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + }; + }; + }; +}; + +&mdio { + status = "okay"; +}; + +/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set + * fixed speed and duplex. */ +ð0 { + status = "okay"; + + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; + +/* eth1 is connected to the switch as well. However DSA only supports a + * single CPU port. So leave this port disabled to avoid confusion. */ + +ð1 { + status = "disabled"; +}; + +/* There is no battery on the boards, so the RTC does not keep time + * when there is no power, making it useless. */ +&rtc { + status = "disabled"; +}; |