diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-apalis-eval.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-apalis-eval.dts | 172 |
1 files changed, 0 insertions, 172 deletions
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts deleted file mode 100644 index 3fc079dfd61e..000000000000 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Copyright 2014-2022 Toradex - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "imx6q.dtsi" -#include "imx6qdl-apalis.dtsi" - -/ { - model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board"; - compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q", - "fsl,imx6q"; - - aliases { - i2c0 = &i2c1; - i2c1 = &i2c3; - i2c2 = &i2c2; - rtc0 = &rtc_i2c; - rtc1 = &snvs_rtc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_pcie_switch: regulator-pcie-switch { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; - regulator-max-microvolt = <1800000>; - regulator-min-microvolt = <1800000>; - regulator-name = "pcie_switch"; - startup-delay-us = <100000>; - status = "okay"; - }; - - reg_3v3_sw: regulator-3v3-sw { - compatible = "regulator-fixed"; - regulator-always-on; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "3.3V_SW"; - }; -}; - -&can1 { - xceiver-supply = <®_3v3_sw>; - status = "okay"; -}; - -&can2 { - xceiver-supply = <®_3v3_sw>; - status = "okay"; -}; - -/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ -&i2c1 { - status = "okay"; - - pcie-switch@58 { - compatible = "plx,pex8605"; - reg = <0x58>; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc_i2c: rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; -}; - -/* - * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier - * board) - */ -&i2c3 { - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - /* active-high meaning opposite of regular PERST# active-low polarity */ - reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - reset-gpio-active-high; - vpcie-supply = <®_pcie_switch>; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&pwm3 { - status = "okay"; -}; - -&pwm4 { - status = "okay"; -}; - -®_usb_host_vbus { - status = "okay"; -}; - -®_usb_otg_vbus { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sound_spdif { - status = "okay"; -}; - -&spdif { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usbh1 { - disable-over-current; - vbus-supply = <®_usb_host_vbus>; - status = "okay"; -}; - -&usbotg { - disable-over-current; - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; -}; - -/* MMC1 */ -&usdhc1 { - status = "okay"; -}; - -/* SD1 */ -&usdhc2 { - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - status = "okay"; -}; |