1 files changed, 0 insertions, 157 deletions
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 5d74a68c56ff..000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
-
-&auart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&auart0_pins_a>;
-	status = "okay";
-};
-
-&duart {
-	pinctrl-names = "default";
-	pinctrl-0 = <&duart_pins_a>;
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
-	status = "okay";
-
-	rtc: rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	eeprom: eeprom@52 {
-		compatible = "atmel,24c64";
-		reg = <0x52>;
-		pagesize = <32>;
-	};
-};
-
-&mac0 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac0_pins_a>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "rmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mac1_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-names = "default";
-	pinctrl-0 = <&hog_pins_a>;
-
-	hog_pins_a: hog-gpios@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_GPMI_D00__GPIO_0_0
-			MX28_PAD_GPMI_D03__GPIO_0_3
-			MX28_PAD_GPMI_D06__GPIO_0_6
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-};
-
-&ssp0 {
-	compatible = "fsl,imx28-mmc";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_4bit_pins_a>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&ssp2 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx28-spi";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_a>;
-	status = "okay";
-
-	flash: flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "everspin,mr25h256", "mr25h256";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&usb0 {
-	vbus-supply = <&reg_usb0_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins_b>;
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "okay";
-};