1 files changed, 0 insertions, 109 deletions
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index 0e15bdfd7281..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	spi-2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
-
-&pinctrl {
-	spi2_pins_cfa10056: spi2-cfa10056@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_SSP2_SCK__GPIO_2_16
-			MX28_PAD_SSP2_MOSI__GPIO_2_17
-			MX28_PAD_SSP2_MISO__GPIO_2_18
-			MX28_PAD_AUART1_TX__GPIO_3_5
-		>;
-		fsl,drive-strength = <MXS_DRIVE_8mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-
-	lcdif_pins_cfa10056: lcdif-10056@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RD_E__LCD_VSYNC
-			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-			MX28_PAD_LCD_RS__LCD_DOTCLK
-			MX28_PAD_LCD_CS__LCD_ENABLE
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_DISABLE>;
-	};
-
-	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-		reg = <0>;
-		fsl,pinmux-ids = <
-			MX28_PAD_LCD_RESET__GPIO_3_30
-		>;
-		fsl,drive-strength = <MXS_DRIVE_4mA>;
-		fsl,voltage = <MXS_VOLTAGE_HIGH>;
-		fsl,pull-up = <MXS_PULL_ENABLE>;
-	};
-};
-
-&lcdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&lcdif_24bit_pins_a
-			&lcdif_pins_cfa10056
-			&lcdif_pins_cfa10056_pullup >;
-	display = <&display0>;
-	status = "okay";
-
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <32000000>;
-				hactive = <480>;
-				vactive = <800>;
-				hback-porch = <2>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vfront-porch = <2>;
-				hsync-len = <5>;
-				vsync-len = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};