diff options
Diffstat (limited to 'arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi')
-rw-r--r-- | arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 510 |
1 files changed, 0 insertions, 510 deletions
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi deleted file mode 100644 index b4a851aa8881..000000000000 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ /dev/null @@ -1,510 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source - * - * Copyright (c) 2013 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * Copyright (c) 2014 Collabora Ltd. - * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> - * Anand Moon <linux.amoon@gmail.com> - */ - -#include <dt-bindings/input/input.h> -#include "exynos5422-odroid-core.dtsi" - -/ { - aliases { - mmc0 = &mmc_0; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&power_key>; - - power-key { - /* - * The power button (SW2) is connected to the PWRON - * pin (active high) of the S2MPS11 PMIC, which acts - * as a 16ms debouce filter and signal inverter with - * output on ONOB pin (active low). ONOB PMIC pin is - * then connected to XEINT3 SoC pin. - */ - gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <0>; - wakeup-source; - }; - }; - - emmc_pwrseq: pwrseq { - pinctrl-0 = <&emmc_nrst_pin>; - pinctrl-names = "default"; - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; - }; - - fan0: pwm-fan { - compatible = "pwm-fan"; - pwms = <&pwm 0 20972 0>; - #cooling-cells = <2>; - cooling-levels = <0 130 170 230>; - }; - - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu0_alert0: cpu-alert-0 { - temperature = <50000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu0_alert1: cpu-alert-1 { - temperature = <60000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu0_alert2: cpu-alert-2 { - temperature = <70000>; /* millicelsius */ - hysteresis = <5000>; /* millicelsius */ - type = "active"; - }; - cpu0_crit0: cpu-crit-0 { - temperature = <120000>; /* millicelsius */ - hysteresis = <0>; /* millicelsius */ - type = "critical"; - }; - /* - * Exynos542x supports only 4 trip-points - * so for these polling mode is required. - * Start polling at temperature level of last - * interrupt-driven trip: cpu0_alert2 - */ - cpu0_alert3: cpu-alert-3 { - temperature = <70000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - cpu0_alert4: cpu-alert-4 { - temperature = <85000>; /* millicelsius */ - hysteresis = <10000>; /* millicelsius */ - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu0_alert2>; - cooling-device = <&fan0 2 3>; - }; - /* - * When reaching cpu0_alert3, reduce CPU - * by 2 steps. On Exynos5422/5800 that would - * (usually) be: 1800 MHz and 1200 MHz. - */ - map3 { - trip = <&cpu0_alert3>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - /* - * When reaching cpu0_alert4, reduce CPU - * further, down to 600 MHz (14 steps for big, - * 8 steps for LITTLE). - */ - cpu0_cooling_map4: map4 { - trip = <&cpu0_alert4>; - cooling-device = <&cpu0 3 8>, - <&cpu1 3 8>, - <&cpu2 3 8>, - <&cpu3 3 8>, - <&cpu4 3 14>, - <&cpu5 3 14>, - <&cpu6 3 14>, - <&cpu7 3 14>; - }; - }; - }; - cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu1_alert0: cpu-alert-0 { - temperature = <50000>; - hysteresis = <5000>; - type = "active"; - }; - cpu1_alert1: cpu-alert-1 { - temperature = <60000>; - hysteresis = <5000>; - type = "active"; - }; - cpu1_alert2: cpu-alert-2 { - temperature = <70000>; - hysteresis = <5000>; - type = "active"; - }; - cpu1_crit0: cpu-crit-0 { - temperature = <120000>; - hysteresis = <0>; - type = "critical"; - }; - cpu1_alert3: cpu-alert-3 { - temperature = <70000>; - hysteresis = <10000>; - type = "passive"; - }; - cpu1_alert4: cpu-alert-4 { - temperature = <85000>; - hysteresis = <10000>; - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu1_alert2>; - cooling-device = <&fan0 2 3>; - }; - map3 { - trip = <&cpu1_alert3>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - cpu1_cooling_map4: map4 { - trip = <&cpu1_alert4>; - cooling-device = <&cpu0 3 8>, - <&cpu1 3 8>, - <&cpu2 3 8>, - <&cpu3 3 8>, - <&cpu4 3 14>, - <&cpu5 3 14>, - <&cpu6 3 14>, - <&cpu7 3 14>; - }; - }; - }; - cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu2_alert0: cpu-alert-0 { - temperature = <50000>; - hysteresis = <5000>; - type = "active"; - }; - cpu2_alert1: cpu-alert-1 { - temperature = <60000>; - hysteresis = <5000>; - type = "active"; - }; - cpu2_alert2: cpu-alert-2 { - temperature = <70000>; - hysteresis = <5000>; - type = "active"; - }; - cpu2_crit0: cpu-crit-0 { - temperature = <120000>; - hysteresis = <0>; - type = "critical"; - }; - cpu2_alert3: cpu-alert-3 { - temperature = <70000>; - hysteresis = <10000>; - type = "passive"; - }; - cpu2_alert4: cpu-alert-4 { - temperature = <85000>; - hysteresis = <10000>; - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu2_alert2>; - cooling-device = <&fan0 2 3>; - }; - map3 { - trip = <&cpu2_alert3>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - cpu2_cooling_map4: map4 { - trip = <&cpu2_alert4>; - cooling-device = <&cpu0 3 8>, - <&cpu1 3 8>, - <&cpu2 3 8>, - <&cpu3 3 8>, - <&cpu4 3 14>, - <&cpu5 3 14>, - <&cpu6 3 14>, - <&cpu7 3 14>; - }; - }; - }; - cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - cpu3_alert0: cpu-alert-0 { - temperature = <50000>; - hysteresis = <5000>; - type = "active"; - }; - cpu3_alert1: cpu-alert-1 { - temperature = <60000>; - hysteresis = <5000>; - type = "active"; - }; - cpu3_alert2: cpu-alert-2 { - temperature = <70000>; - hysteresis = <5000>; - type = "active"; - }; - cpu3_crit0: cpu-crit-0 { - temperature = <120000>; - hysteresis = <0>; - type = "critical"; - }; - cpu3_alert3: cpu-alert-3 { - temperature = <70000>; - hysteresis = <10000>; - type = "passive"; - }; - cpu3_alert4: cpu-alert-4 { - temperature = <85000>; - hysteresis = <10000>; - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&cpu3_alert2>; - cooling-device = <&fan0 2 3>; - }; - map3 { - trip = <&cpu3_alert3>; - cooling-device = <&cpu0 0 2>, - <&cpu1 0 2>, - <&cpu2 0 2>, - <&cpu3 0 2>, - <&cpu4 0 2>, - <&cpu5 0 2>, - <&cpu6 0 2>, - <&cpu7 0 2>; - }; - cpu3_cooling_map4: map4 { - trip = <&cpu3_alert4>; - cooling-device = <&cpu0 3 8>, - <&cpu1 3 8>, - <&cpu2 3 8>, - <&cpu3 3 8>, - <&cpu4 3 14>, - <&cpu5 3 14>, - <&cpu6 3 14>, - <&cpu7 3 14>; - }; - }; - }; - gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu>; - polling-delay-passive = <250>; - polling-delay = <0>; - trips { - gpu_alert0: gpu-alert-0 { - temperature = <50000>; - hysteresis = <5000>; - type = "active"; - }; - gpu_alert1: gpu-alert-1 { - temperature = <60000>; - hysteresis = <5000>; - type = "active"; - }; - gpu_alert2: gpu-alert-2 { - temperature = <70000>; - hysteresis = <5000>; - type = "active"; - }; - gpu_crit0: gpu-crit-0 { - temperature = <120000>; - hysteresis = <0>; - type = "critical"; - }; - gpu_alert3: gpu-alert-3 { - temperature = <70000>; - hysteresis = <10000>; - type = "passive"; - }; - gpu_alert4: gpu-alert-4 { - temperature = <85000>; - hysteresis = <10000>; - type = "passive"; - }; - }; - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = <&fan0 0 1>; - }; - map1 { - trip = <&gpu_alert1>; - cooling-device = <&fan0 1 2>; - }; - map2 { - trip = <&gpu_alert2>; - cooling-device = <&fan0 2 3>; - }; - map3 { - trip = <&gpu_alert3>; - cooling-device = <&gpu 0 2>; - }; - map4 { - trip = <&gpu_alert4>; - cooling-device = <&gpu 3 6>; - }; - }; - }; - }; -}; - -&buck10_reg { - /* Supplies vmmc-supply of mmc_0 */ - regulator-always-on; - regulator-boot-on; -}; - -&hdmi { - status = "okay"; - ddc = <&i2c_2>; - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - - vdd_osc-supply = <&ldo7_reg>; - vdd_pll-supply = <&ldo6_reg>; - vdd-supply = <&ldo6_reg>; -}; - -&hdmicec { - status = "okay"; - needs-hpd; -}; - -&i2c_2 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - /* used by HDMI DDC */ - status = "okay"; -}; - -&ldo26_reg { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; -}; - -&mixer { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - mmc-pwrseq = <&emmc_pwrseq>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - max-frequency = <200000000>; - vmmc-supply = <&ldo18_reg>; - vqmmc-supply = <&ldo3_reg>; -}; - -&pinctrl_0 { - power_key: power-key-pins { - samsung,pins = "gpx0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq-pins { - samsung,pins = "gpx3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; - }; -}; - -&pinctrl_1 { - emmc_nrst_pin: emmc-nrst-pins { - samsung,pins = "gpd1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; - }; -}; |