diff options
Diffstat (limited to 'arch/arm/boot/dts/ep7211-edb7211.dts')
-rw-r--r-- | arch/arm/boot/dts/ep7211-edb7211.dts | 97 |
1 files changed, 0 insertions, 97 deletions
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts deleted file mode 100644 index 7fb532f227af..000000000000 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "ep7211.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Cirrus Logic EP7211 Development Board"; - compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; - - memory@c0000000 { - device_type = "memory"; - reg = <0xc0000000 0x02000000>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0>; - brightness-levels = < - 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 - 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf - >; - default-brightness-level = <0x0>; - power-supply = <&blen>; - }; - - display: display { - model = "320x240x4"; - bits-per-pixel = <4>; - ac-prescale = <17>; - - display-timings { - native-mode = <&timing0>; - timing0: 320x240 { - hactive = <320>; - hback-porch = <0>; - hfront-porch = <0>; - hsync-len = <0>; - vactive = <240>; - vback-porch = <0>; - vfront-porch = <0>; - vsync-len = <0>; - clock-frequency = <6500000>; - }; - }; - }; - - i2c: i2c { - compatible = "i2c-gpio"; - gpios = <&portd 4 GPIO_ACTIVE_HIGH>, - <&portd 5 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <2>; - i2c-gpio,scl-output-only; - #address-cells = <1>; - #size-cells = <0>; - }; - - lcddc: lcddc { - compatible = "regulator-fixed"; - regulator-name = "BACKLIGHT ENABLE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&portd 1 GPIO_ACTIVE_HIGH>; - }; - - blen: blen { - compatible = "regulator-fixed"; - regulator-name = "BACKLIGHT ENABLE"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&portd 3 GPIO_ACTIVE_HIGH>; - }; -}; - -&bus { - flash: nor@0 { - compatible = "cfi-flash"; - reg = <0 0x00000000 0x02000000>; - bank-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&fb { - display = <&display>; - lcd-supply = <&lcddc>; - status = "okay"; -}; - -&portd { - lcden { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "LCD ENABLE"; - }; -}; |