diff options
Diffstat (limited to 'arch/arm/boot/dts/dra71-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/dra71-evm.dts | 316 |
1 files changed, 0 insertions, 316 deletions
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts deleted file mode 100644 index a64364443031..000000000000 --- a/arch/arm/boot/dts/dra71-evm.dts +++ /dev/null @@ -1,316 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ - */ - -#include "dra71x.dtsi" -#include "dra7-mmc-iodelay.dtsi" -#include "dra72x-mmc-iodelay.dtsi" -#include <dt-bindings/net/ti-dp83867.h> - -/ { - compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; - model = "TI DRA718 EVM"; - - memory { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - ipu2_memory_region: ipu2-memory@95800000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x95800000 0x0 0x3800000>; - reusable; - status = "okay"; - }; - - dsp1_memory_region: dsp1-memory@99000000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x99000000 0x0 0x4000000>; - reusable; - status = "okay"; - }; - - ipu1_memory_region: ipu1-memory@9d000000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x9d000000 0x0 0x2000000>; - reusable; - status = "okay"; - }; - }; - - vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { - compatible = "regulator-gpio"; - - regulator-name = "vddshv8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - vin-supply = <&evm_5v0>; - - gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; - states = <1800000 0x0 - 3300000 0x1>; - }; - - evm_1v8_sw: fixedregulator-evm_1v8 { - compatible = "regulator-fixed"; - regulator-name = "evm_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&lp8732_buck0_reg>; - regulator-always-on; - regulator-boot-on; - }; - - poweroff: gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; - input; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - - lp8733: lp8733@60 { - compatible = "ti,lp8733"; - reg = <0x60>; - - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&evm_5v0>; - ldo1-in-supply =<&evm_5v0>; - - lp8733_regulators: regulators { - lp8733_buck0_reg: buck0 { - /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */ - regulator-name = "lp8733-buck0"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - lp8733_buck1_reg: buck1 { - /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */ - regulator-name = "lp8733-buck1"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo0_reg: ldo0 { - /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */ - regulator-name = "lp8733-ldo0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8733_ldo1_reg: ldo1 { - /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */ - regulator-name = "lp8733-ldo1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - lp8732: lp8732@61 { - compatible = "ti,lp8732"; - reg = <0x61>; - - buck0-in-supply =<&vsys_3v3>; - buck1-in-supply =<&vsys_3v3>; - ldo0-in-supply =<&vsys_3v3>; - ldo1-in-supply =<&vsys_3v3>; - - lp8732_regulators: regulators { - lp8732_buck0_reg: buck0 { - /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */ - regulator-name = "lp8732-buck0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - lp8732_buck1_reg: buck1 { - /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */ - regulator-name = "lp8732-buck1"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8732_ldo0_reg: ldo0 { - /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */ - regulator-name = "lp8732-ldo0"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - lp8732_ldo1_reg: ldo1 { - /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */ - regulator-name = "lp8732-ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&pcf_lcd { - interrupt-parent = <&gpio7>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; -}; - -&pcf_gpio_21 { - interrupt-parent = <&gpio7>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; -}; - -&pcf_hdmi { - hdmi-i2c-disable-hog { - /* - * PM_OEn to High: Disable routing I2C3 to PM_I2C - * With this PM_SEL(p3) should not matter - */ - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - output-high; - line-name = "pm_oe_n"; - }; -}; - -&mmc1 { - pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; - pinctrl-0 = <&mmc1_pins_default_no_clk_pu>; - pinctrl-1 = <&mmc1_pins_hs>; - pinctrl-2 = <&mmc1_pins_sdr12>; - pinctrl-3 = <&mmc1_pins_sdr25>; - pinctrl-4 = <&mmc1_pins_sdr50>; - pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>; - pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; - vqmmc-supply = <&vpo_sd_1v8_3v3>; -}; - -&mmc2 { - pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v"; - pinctrl-0 = <&mmc2_pins_default>; - pinctrl-1 = <&mmc2_pins_hs>; - pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; - pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; - vmmc-supply = <&evm_1v8_sw>; - vqmmc-supply = <&evm_1v8_sw>; -}; - -&mac_sw { - mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, - <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ - <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - status = "okay"; -}; - -&cpsw_port1 { - phy-handle = <&dp83867_0>; - phy-mode = "rgmii-id"; - ti,dual-emac-pvid = <1>; -}; - -&cpsw_port2 { - phy-handle = <&dp83867_1>; - phy-mode = "rgmii-id"; - ti,dual-emac-pvid = <2>; -}; - -&davinci_mdio_sw { - dp83867_0: ethernet-phy@2 { - reg = <2>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,min-output-impedance; - ti,dp83867-rxctrl-strap-quirk; - }; - - dp83867_1: ethernet-phy@3 { - reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; - ti,min-output-impedance; - ti,dp83867-rxctrl-strap-quirk; - }; -}; - -/* No Sata on this device */ -&sata_phy { - status = "disabled"; -}; - -&sata { - status = "disabled"; -}; - -/* No RTC on this device */ -&rtc { - status = "disabled"; -}; - -&usb2_phy1 { - phy-supply = <&lp8733_ldo1_reg>; -}; - -&usb2_phy2 { - phy-supply = <&lp8733_ldo1_reg>; -}; - -&dss { - /* Supplied by VDA_1V8_PLL */ - vdda_video-supply = <&lp8732_ldo0_reg>; -}; - -&hdmi { - /* Supplied by VDA_1V8_PHY */ - vdda_video-supply = <&lp8732_ldo1_reg>; -}; - -&extcon_usb1 { - vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; -}; - -&extcon_usb2 { - vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; -}; - -&ipu2 { - status = "okay"; - memory-region = <&ipu2_memory_region>; -}; - -&ipu1 { - status = "okay"; - memory-region = <&ipu1_memory_region>; -}; - -&dsp1 { - status = "okay"; - memory-region = <&dsp1_memory_region>; -}; |