diff options
Diffstat (limited to 'arch/arm/boot/dts/dove-sbc-a510.dts')
-rw-r--r-- | arch/arm/boot/dts/dove-sbc-a510.dts | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts deleted file mode 100644 index df021f9b0117..000000000000 --- a/arch/arm/boot/dts/dove-sbc-a510.dts +++ /dev/null @@ -1,183 +0,0 @@ -/* - * Device Tree file for Compulab SBC-A510 Single Board Computer - * - * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of the - * License. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to - * - * 0.0 USB0 VBUS_EN (active high) - * 0.1 USB0 VBUS_GOOD - * 0.2 DVI transmitter TI TFP410 MSEN - * 0.3 DVI transmitter TI TFP410 PD# (active low power down) - * 0.4 LVDS transmitter DS90C365 PD# (active low power down) - * 0.5 LCD nRST (active low reset) - * 0.6 PCIe0 nRST (active low reset) - * 0.7 mini-PCIe slot W_DISABLE# - * - * 1.0 MMC WP - * 1.1 Camera Input FPC FLASH_STB and P21.5 - * 1.2 Camera Input FPC WE and P21.22 - * 1.3 MMC VCC_EN (active high) and P21.7 - * 1.4 Camera Input FPC AFTR_RST and P21.17 - * 1.5 Camera Input FPC OE and P21.19 - * 1.6 Camera Input FPC SNPSHT and P21.6 - * 1.7 Camera Input FPC SHTR and P21.10 - */ - -/dts-v1/; - -#include "dove-cm-a510.dtsi" - -/ { - model = "Compulab SBC-A510"; - compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove"; - - chosen { - stdout-path = &uart0; - }; - - regulators { - usb0_power: regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>; - }; - - mmc_power: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "MMC Power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -/* Ethernet0 depends on CM-A510 option E1 */ -&mdio { status = "disabled"; }; -ð { status = "disabled"; }; -ðphy { status = "disabled"; }; - -/* - * USB port 0 can be powered and monitored by I2C GPIO expander: - * VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1 - */ -&ehci0 { - status = "okay"; - vbus-supply = <&usb0_power>; -}; - -/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */ -&ehci1 { status = "okay"; }; - -/* - * I2C bus layout: - * i2c0: - * - Audio Codec, 0x1a (option from CM-A510) - * - DVI transmitter TI TFP410, 0x39 - * - HDMI/DVI DDC channel - * i2c1: - * - GPIO expander, NXP PCA9555, 0x20 - * - VGA DDC channel - */ -&i2c { - pinctrl-0 = <&pmx_i2c1>; - pinctrl-names = "default"; -}; - -&i2c0 { - /* TI TFP410 DVI transmitter */ - dvi: video@39 { - compatible = "ti,tfp410"; - reg = <0x39>; - powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>; - }; -}; - -&i2c1 { - status = "okay"; - - /* NXP PCA9555 GPIO expander */ - gpio_ext: gpio@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&pcie { status = "okay"; }; - -/* - * PCIe0 can be configured by Jumper E1 to be either connected to - * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge. - */ -&pcie0 { - status = "okay"; - pinctrl-0 = <&pmx_pcie0_clkreq>; - pinctrl-names = "default"; - reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>; -}; - -/* Ethernet1 depends on CM-A510 option E2 */ -&pcie1 { status = "disabled"; }; - -/* SATA connector */ -&sata0 { status = "okay"; }; - -/* - * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has - * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10 - */ -&sdio0 { - vmmc-supply = <&mmc_power>; - wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -/* UART0 on RS232 mini-connector */ -&uart0 { status = "okay"; }; -/* UART2 on pin headers */ -&uart2 { status = "okay"; }; |