1 files changed, 0 insertions, 113 deletions
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
deleted file mode 100644
index 79ccdd4470f4..000000000000
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "dm814x.dtsi"
-
-/ {
-	model = "HP t410 Smart Zero Client";
-	compatible = "hp,t410", "ti,dm8148", "ti,dm814";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>;	/* 1 GB */
-	};
-
-	/* gpio9 seems to control USB VBUS regulator and/or hub power */
-	usb_power: regulator@9 {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
-};
-
-&cpsw_emac1 {
-	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-id";
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	ethphy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
-&mmc1 {
-	status = "disabled";
-};
-
-&mmc2 {
-	status = "disabled";
-};
-
-&mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_pins>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
-		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
-	dma-names = "tx", "rx";
-	non-removable;
-};
-
-&pincntl {
-	sd2_pins: pinmux_sd2_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
-			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
-			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
-			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
-			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
-			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
-			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
-			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
-			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
-			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
-			DM814X_IOPAD(0x0920, PIN_INPUT | 0x40)	/* SD2_SDCD */
-			>;
-	};
-
-	usb0_pins: pinmux_usb0_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
-			>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
-			>;
-	};
-};
-
-&usb0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb0_pins>;
-	dr_mode = "host";
-};
-
-&usb1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-	dr_mode = "host";
-};