diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-tse850-3.dts')
| -rw-r--r-- | arch/arm/boot/dts/at91-tse850-3.dts | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts deleted file mode 100644 index b99a4fb44a36..000000000000 --- a/arch/arm/boot/dts/at91-tse850-3.dts +++ /dev/null @@ -1,302 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board - * - * Copyright (C) 2017 Axentia Technologies AB - * - * Author: Peter Rosin <peda@axentia.se> - */ -/dts-v1/; -#include <dt-bindings/pwm/pwm.h> -#include "at91-linea.dtsi" - -/ { - model = "Axentia TSE-850 3.0"; - compatible = "axentia,tse850v3", "axentia,linea", - "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - - sck: oscillator { - compatible = "fixed-clock"; - - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "sck"; - }; - - reg_3v3: regulator { - compatible = "regulator-fixed"; - - regulator-name = "3v3-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ana: reg-ana { - compatible = "pwm-regulator"; - - regulator-name = "ANA"; - - pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; - pwm-dutycycle-unit = <1000>; - pwm-dutycycle-range = <100 1000>; - - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <20000000>; - regulator-ramp-delay = <1000>; - }; - - sound { - compatible = "axentia,tse850-pcm5142"; - - axentia,cpu-dai = <&ssc0>; - axentia,audio-codec = <&pcm5142>; - - axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; - axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; - axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; - - axentia,ana-supply = <&ana>; - }; - - dac: dpot-dac { - compatible = "dpot-dac"; - vref-supply = <®_3v3>; - io-channels = <&dpot 0>; - io-channel-names = "dpot"; - #io-channel-cells = <1>; - }; - - env_det: envelope-detector { - compatible = "axentia,tse850-envelope-detector"; - io-channels = <&dac 0>; - io-channel-names = "dac"; - #io-channel-cells = <1>; - - interrupt-parent = <&pioA>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "comp"; - }; - - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>, - <&pioA 2 GPIO_ACTIVE_HIGH>; - idle-state = <0>; - }; - - envelope-detector-mux { - compatible = "io-channel-mux"; - io-channels = <&env_det 0>; - io-channel-names = "parent"; - - mux-controls = <&mux>; - - channels = "", "", - "sync-1", - "in", - "out", - "sync-2", - "sys-reg", - "ana-reg"; - }; - - leds { - compatible = "gpio-leds"; - - led-ch1-red { - label = "ch-1:red"; - gpios = <&pioA 23 GPIO_ACTIVE_LOW>; - }; - led-ch1-green { - label = "ch-1:green"; - gpios = <&pioA 22 GPIO_ACTIVE_LOW>; - }; - led-ch2-red { - label = "ch-2:red"; - gpios = <&pioA 21 GPIO_ACTIVE_LOW>; - }; - led-ch2-green { - label = "ch-2:green"; - gpios = <&pioA 20 GPIO_ACTIVE_LOW>; - }; - led-data-red { - label = "data:red"; - gpios = <&pioA 19 GPIO_ACTIVE_LOW>; - }; - led-data-green { - label = "data:green"; - gpios = <&pioA 18 GPIO_ACTIVE_LOW>; - }; - led-alarm-red { - label = "alarm:red"; - gpios = <&pioA 17 GPIO_ACTIVE_LOW>; - }; - led-alarm-green { - label = "alarm:green"; - gpios = <&pioA 16 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&nand { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x40000>; - }; - - barebox@40000 { - label = "bootloader"; - reg = <0x40000 0x60000>; - }; - - bareboxenv@c0000 { - label = "bareboxenv"; - reg = <0xc0000 0x40000>; - }; - - bareboxenv2@100000 { - label = "bareboxenv2"; - reg = <0x100000 0x40000>; - }; - - oftree@180000 { - label = "oftree"; - reg = <0x180000 0x20000>; - }; - - kernel@200000 { - label = "kernel"; - reg = <0x200000 0x500000>; - }; - - rootfs@800000 { - label = "rootfs"; - reg = <0x800000 0x0f800000>; - }; - - ovlfs@10000000 { - label = "ovlfs"; - reg = <0x10000000 0x10000000>; - }; - }; -}; - -&ssc0 { - #sound-dai-cells = <0>; - - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - jc42@18 { - compatible = "nxp,se97b", "jedec,jc-42.4-temp"; - reg = <0x18>; - smbus-timeout-disable; - }; - - dpot: mcp4651-104@28 { - compatible = "microchip,mcp4651-104"; - reg = <0x28>; - #io-channel-cells = <1>; - }; - - pcm5142: pcm5142@4c { - compatible = "ti,pcm5142"; - - reg = <0x4c>; - #sound-dai-cells = <0>; - - AVDD-supply = <®_3v3>; - DVDD-supply = <®_3v3>; - CPVDD-supply = <®_3v3>; - - clocks = <&sck>; - - pll-in = <3>; - pll-out = <6>; - }; - - eeprom@50 { - compatible = "nxp,se97b", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&pinctrl { - tse850 { - pinctrl_usba_vbus: usba-vbus { - atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - }; -}; - -&watchdog { - status = "okay"; -}; - -&usart0 { - status = "okay"; - - atmel,use-dma-rx; -}; - -&pwm0 { - status = "okay"; - - pinctrl-0 = <&pinctrl_pwm0_pwml2_1>; - pinctrl-names = "default"; -}; - -&macb1 { - status = "okay"; - - phy-mode = "rmii"; - - #address-cells = <1>; - #size-cells = <0>; - - phy0: ethernet-phy@3 { - reg = <3>; - - interrupt-parent = <&pioE>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - }; -}; - -&usb0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usba_vbus>; - atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>; -}; - -&usb1 { - status = "okay"; - - num-ports = <1>; - atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>; - atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>; -}; - -&usb2 { - status = "okay"; -}; - -&dbgu { - status = "okay"; - - dmas = <0>, <0>; /* Do not use DMA for dbgu */ -}; |