diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-kizbox.dts')
-rw-r--r-- | arch/arm/boot/dts/at91-kizbox.dts | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts deleted file mode 100644 index 307663b4eec2..000000000000 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> - * 2014-2015 Gaƫl PORTAY <g.portay@overkiz.com> - */ -/dts-v1/; -#include "at91sam9g20.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - model = "Overkiz Kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "ubi.mtd=ubi"; - stdout-path = &dbgu; - }; - - memory@20000000 { - reg = <0x20000000 0x2000000>; - }; - - clocks { - main_xtal { - clock-frequency = <18432000>; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - button-reset { - label = "PB_RST"; - gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; - linux,code = <0x100>; - wakeup-source; - }; - - button-user { - label = "PB_USER"; - gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; - linux,code = <0x101>; - wakeup-source; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "pwm:green:network"; - pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - led-2 { - label = "pwm:red:network"; - pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - led-3 { - label = "pwm:green:user"; - pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - - led-4 { - label = "pwm:red:user"; - pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; -}; - -&tcb0 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; -}; - -&tcb1 { - tcb1_pwm0: pwm@0 { - compatible = "atmel,tcb-pwm"; - reg = <0>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>; - }; - - tcb1_pwm1: pwm@1 { - compatible = "atmel,tcb-pwm"; - reg = <1>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa1>; - }; - - tcb1_pwm2: pwm@2 { - compatible = "atmel,tcb-pwm"; - reg = <2>; - #pwm-cells = <3>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tcb1_tioa2>; - }; -}; - -&ebi { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; - pinctrl-names = "default"; - - nand@3 { - reg = <0x3 0x0 0x800000>; - rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; - cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - nand-on-flash-bbt; - label = "atmel_nand"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - bootstrap@0 { - label = "bootstrap"; - reg = <0x0 0x20000>; - }; - - ubi@20000 { - label = "ubi"; - reg = <0x20000 0x7fe0000>; - }; - }; - }; -}; - -&macb0 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; -}; - -&usart3 { - status = "okay"; -}; - -&dbgu { - status = "okay"; -}; - -&watchdog { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; -}; - -&usb0 { - num-ports = <1>; - status = "okay"; -}; - -&i2c_gpio0 { - status = "okay"; - - rtc: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; |