diff options
Diffstat (limited to 'arch/arm/boot/dts/at91-foxg20.dts')
-rw-r--r-- | arch/arm/boot/dts/at91-foxg20.dts | 168 |
1 files changed, 0 insertions, 168 deletions
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts deleted file mode 100644 index 9dfd5de808d1..000000000000 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ /dev/null @@ -1,168 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board - * - * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC) - * - * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com> - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - model = "Acme Systems FoxG20"; - compatible = "acme,foxg20", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait"; - }; - - memory@20000000 { - reg = <0x20000000 0x4000000>; - }; - - clocks { - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - tcb0: timer@fffa0000 { - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - - usb1: gadget@fffa4000 { - atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - mmc0: mmc@fffa8000 { - pinctrl-0 = < - &pinctrl_mmc0_clk - &pinctrl_mmc0_slot1_cmd_dat0 - &pinctrl_mmc0_slot1_dat1_3>; - pinctrl-names = "default"; - status = "okay"; - - slot@1 { - reg = <1>; - bus-width = <4>; - }; - }; - - usart0: serial@fffb0000 { - pinctrl-0 = - <&pinctrl_usart0 - &pinctrl_usart0_rts - &pinctrl_usart0_cts - >; - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - usart2: serial@fffb8000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usart3: serial@fffd0000 { - status = "okay"; - }; - - uart0: serial@fffd4000 { - status = "okay"; - }; - - uart1: serial@fffd8000 { - status = "okay"; - }; - - dbgu: serial@fffff200 { - status = "okay"; - }; - - pinctrl@fffff400 { - board { - pinctrl_pck0_as_mck: pck0_as_mck { - atmel,pins = - <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; - }; - }; - - mmc0_slot1 { - pinctrl_board_mmc0_slot1: mmc0_slot1-board { - atmel,pins = - <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* CD pin */ - }; - }; - - i2c0 { - pinctrl_i2c0: i2c0-0 { - atmel,pins = - <AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE /* TWD (SDA), open drain */ - AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_MULTI_DRIVE>; /* TWCK (SCL), open drain */ - }; - }; - }; - - watchdog@fffffd40 { - status = "okay"; - }; - }; - - usb0: ohci@500000 { - num-ports = <2>; - status = "okay"; - }; - }; - - i2c-gpio-0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - i2c-gpio,delay-us = <5>; /* ~85 kHz */ - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - - /* red LED marked "PC7" near mini USB (device) receptacle */ - user_led { - label = "user_led"; - gpios = <&pioC 7 GPIO_ACTIVE_HIGH>; /* PC7 */ - linux,default-trigger = "heartbeat"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - - button { - label = "Button"; - gpios = <&pioC 4 GPIO_ACTIVE_LOW>; - linux,code = <0x103>; - wakeup-source; - }; - }; -}; |