diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts')
-rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 518 |
1 files changed, 0 insertions, 518 deletions
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts deleted file mode 100644 index 9605e53f5bbf..000000000000 --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts +++ /dev/null @@ -1,518 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; -#include "aspeed-g4.dtsi" -#include <dt-bindings/gpio/aspeed-gpio.h> - -/ { - model = "Quanta Q71L BMC"; - compatible = "quanta,q71l-bmc", "aspeed,ast2400"; - - aliases { - i2c14 = &i2c_pcie2; - i2c15 = &i2c_pcie3; - i2c16 = &i2c_pcie6; - i2c17 = &i2c_pcie7; - i2c18 = &i2c_pcie1; - i2c19 = &i2c_pcie4; - i2c20 = &i2c_pcie5; - i2c21 = &i2c_pcie8; - i2c22 = &i2c_pcie9; - i2c23 = &i2c_pcie10; - i2c24 = &i2c_ssd1; - i2c25 = &i2c_ssd2; - i2c26 = &i2c_psu4; - i2c27 = &i2c_psu1; - i2c28 = &i2c_psu3; - i2c29 = &i2c_psu2; - }; - - chosen { - stdout-path = &uart5; - bootargs = "console=ttyS4,115200 earlycon"; - }; - - memory@40000000 { - reg = <0x40000000 0x8000000>; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - vga_memory: framebuffer@47800000 { - no-map; - reg = <0x47800000 0x00800000>; /* 8MB */ - }; - }; - - leds { - compatible = "gpio-leds"; - - heartbeat { - gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; - }; - - power { - gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>; - }; - - identify { - gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; - }; - }; - - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, - <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, - <&adc 8>, <&adc 9>, <&adc 10>; - }; - - iio-hwmon-battery { - compatible = "iio-hwmon"; - io-channels = <&adc 11>; - }; - - i2c1mux: i2cmux { - compatible = "i2c-mux-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - /* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */ - i2c-parent = <&i2c1>; - }; -}; - -&fmc { - status = "okay"; - flash@0 { - status = "okay"; - label = "bmc"; - m25p,fast-read; -#include "openbmc-flash-layout.dtsi" - }; -}; - -&spi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1_default>; - - flash@0 { - status = "okay"; - m25p,fast-read; - label = "pnor"; - }; -}; - -&pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default - &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; -}; - -&p2a { - status = "okay"; - memory-region = <&vga_memory>; -}; - -&ibt { - status = "okay"; -}; - -&lpc_ctrl { - status = "okay"; -}; - -&lpc_snoop { - status = "okay"; - snoop-ports = <0x80>; -}; - -&mac0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rmii1_default>; - use-ncsi; -}; - -&mac1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; -}; - -&uart1 { - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&i2c0 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; - - /* temp2 inlet */ - tmp75@4c { - compatible = "ti,tmp75"; - reg = <0x4c>; - }; - - /* temp3 */ - tmp75@4e { - compatible = "ti,tmp75"; - reg = <0x4e>; - }; - - /* temp1 */ - tmp75@4f { - compatible = "ti,tmp75"; - reg = <0x4f>; - }; - - /* Baseboard FRU */ - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; - - /* FP FRU */ - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; -}; - -&i2c2 { - status = "okay"; - - /* 0: PCIe Slot 2, - * Slot 3, - * Slot 6, - * Slot 7 - */ - i2c-switch@74 { - compatible = "nxp,pca9546"; - reg = <0x74>; - #address-cells = <1>; - #size-cells = <0>; - i2c-mux-idle-disconnect; /* may use mux@77 next. */ - - i2c_pcie2: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c_pcie3: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - i2c_pcie6: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - i2c_pcie7: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - }; - - /* 0: PCIe Slot 1, - * Slot 4, - * Slot 5, - * Slot 8, - * Slot 9, - * Slot 10, - * SSD 1, - * SSD 2 - */ - i2c-switch@77 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x77>; - i2c-mux-idle-disconnect; /* may use mux@74 next. */ - - i2c_pcie1: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c_pcie4: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - - i2c_pcie5: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - }; - - i2c_pcie8: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - }; - - i2c_pcie9: i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - }; - - i2c_pcie10: i2c@5 { - #address-cells = <1>; - #size-cells = <0>; - reg = <5>; - }; - - i2c_ssd1: i2c@6 { - #address-cells = <1>; - #size-cells = <0>; - reg = <6>; - }; - - i2c_ssd2: i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - }; - }; -}; - -&i2c3 { - status = "okay"; - - /* BIOS FRU */ - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; -}; - -&i2c4 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2c6 { - status = "okay"; -}; - -&i2c7 { - status = "okay"; - - /* 0: PSU4 - * PSU1 - * PSU3 - * PSU2 - */ - i2c-switch@70 { - compatible = "nxp,pca9546"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c_psu4: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - psu@59 { - compatible = "pmbus"; - reg = <0x59>; - }; - }; - - i2c_psu1: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - psu@58 { - compatible = "pmbus"; - reg = <0x58>; - }; - }; - - i2c_psu3: i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - psu@58 { - compatible = "pmbus"; - reg = <0x58>; - }; - }; - - i2c_psu2: i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - psu@59 { - compatible = "pmbus"; - reg = <0x59>; - }; - }; - }; - - /* PDB FRU */ - eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - }; -}; - -&i2c8 { - status = "okay"; - - /* BMC FRU */ - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; -}; - -&vuart { - status = "okay"; -}; - -&wdt2 { - status = "okay"; -}; - -&adc { - status = "okay"; -}; - -&pwm_tacho { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_default - &pinctrl_pwm1_default - &pinctrl_pwm2_default - &pinctrl_pwm3_default>; - - fan@0 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x00>; - }; - - fan@1 { - reg = <0x01>; - aspeed,fan-tach-ch = /bits/ 8 <0x01>; - }; - - fan@2 { - reg = <0x02>; - aspeed,fan-tach-ch = /bits/ 8 <0x02>; - }; - - fan@3 { - reg = <0x03>; - aspeed,fan-tach-ch = /bits/ 8 <0x03>; - }; - - fan@4 { - reg = <0x00>; - aspeed,fan-tach-ch = /bits/ 8 <0x04>; - }; - - fan@5 { - reg = <0x01>; - aspeed,fan-tach-ch = /bits/ 8 <0x05>; - }; - - fan@6 { - reg = <0x02>; - aspeed,fan-tach-ch = /bits/ 8 <0x06>; - }; - - fan@7 { - reg = <0x03>; - aspeed,fan-tach-ch = /bits/ 8 <0x07>; - }; -}; - -&i2c1mux { - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - /* Memory Riser 1 FRU */ - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - - /* Memory Riser 2 FRU */ - eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - }; - - /* Memory Riser 3 FRU */ - eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - }; - - /* Memory Riser 4 FRU */ - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - }; - }; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - /* Memory Riser 5 FRU */ - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; - - /* Memory Riser 6 FRU */ - eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - }; - - /* Memory Riser 7 FRU */ - eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - }; - - /* Memory Riser 8 FRU */ - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - }; - }; -}; |