diff options
Diffstat (limited to 'arch/arm/boot/dts/armada-388-helios4.dts')
-rw-r--r-- | arch/arm/boot/dts/armada-388-helios4.dts | 324 |
1 files changed, 0 insertions, 324 deletions
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts deleted file mode 100644 index ec134e22bae3..000000000000 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* - * Device Tree file for Helios4 - * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828) - * - * Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io> - * - */ - -/dts-v1/; -#include "armada-388.dtsi" -#include "armada-38x-solidrun-microsom.dtsi" - -/ { - model = "Helios4"; - compatible = "kobol,helios4", "marvell,armada388", - "marvell,armada385", "marvell,armada380"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2 GB */ - }; - - aliases { - /* So that mvebu u-boot can update the MAC addresses */ - ethernet1 = ð0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reg_12v: regulator-12v { - compatible = "regulator-fixed"; - regulator-name = "power_brick_12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - reg_3p3v: regulator-3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - vin-supply = <®_12v>; - }; - - reg_5p0v_hdd: regulator-5v-hdd { - compatible = "regulator-fixed"; - regulator-name = "5V_HDD"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - vin-supply = <®_12v>; - }; - - reg_5p0v_usb: regulator-5v-usb { - compatible = "regulator-fixed"; - regulator-name = "USB-PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - gpio = <&expander0 6 GPIO_ACTIVE_HIGH>; - vin-supply = <®_12v>; - }; - - system-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&helios_system_led_pins>; - - status-led { - label = "helios4:green:status"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - linux,default-trigger = "heartbeat"; - default-state = "on"; - }; - - fault-led { - label = "helios4:red:fault"; - gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; - - io-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&helios_io_led_pins>; - - sata1-led { - label = "helios4:green:ata1"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - default-state = "off"; - }; - sata2-led { - label = "helios4:green:ata2"; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - default-state = "off"; - }; - sata3-led { - label = "helios4:green:ata3"; - gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata3"; - default-state = "off"; - }; - sata4-led { - label = "helios4:green:ata4"; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata4"; - default-state = "off"; - }; - usb-led { - label = "helios4:green:usb"; - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usb-host"; - default-state = "off"; - }; - }; - - fan1: j10-pwm { - compatible = "pwm-fan"; - pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */ - pinctrl-names = "default"; - pinctrl-0 = <&helios_fan1_pins>; - }; - - fan2: j17-pwm { - compatible = "pwm-fan"; - pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */ - pinctrl-names = "default"; - pinctrl-0 = <&helios_fan2_pins>; - }; - - usb2_phy: usb2-phy { - compatible = "usb-nop-xceiv"; - vbus-regulator = <®_5p0v_usb>; - }; - - usb3_phy: usb3-phy { - compatible = "usb-nop-xceiv"; - }; - - soc { - internal-regs { - i2c@11000 { - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-Board Revision bit 0 # - * 1-Board Revision bit 1 # - * 5-USB3 overcurrent - * 6-USB3 power - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&pca0_pins>; - interrupt-parent = <&gpio0>; - interrupts = <23 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - - board-rev-bit-0-hog { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "board-rev-0"; - }; - board-rev-bit-1-hog { - gpio-hog; - gpios = <1 GPIO_ACTIVE_LOW>; - input; - line-name = "board-rev-1"; - }; - usb3-ilimit-hog { - gpio-hog; - gpios = <5 GPIO_ACTIVE_HIGH>; - input; - line-name = "usb-overcurrent-status"; - }; - }; - - temp_sensor: temp@4c { - compatible = "ti,lm75"; - reg = <0x4c>; - vcc-supply = <®_3p3v>; - }; - }; - - i2c@11100 { - /* - * External I2C Bus for user peripheral - */ - clock-frequency = <400000>; - pinctrl-0 = <&helios_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - sata@a8000 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata0: sata-port@0 { - reg = <0>; - }; - - sata1: sata-port@1 { - reg = <1>; - }; - }; - - sata@e0000 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata2: sata-port@0 { - reg = <0>; - }; - - sata3: sata-port@1 { - reg = <1>; - }; - }; - - spi@10680 { - pinctrl-0 = <&spi1_pins - µsom_spi1_cs_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - sdhci@d8000 { - bus-width = <4>; - cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - no-1-8-v; - pinctrl-0 = <&helios_sdhci_pins - &helios_sdhci_cd_pins>; - pinctrl-names = "default"; - status = "okay"; - vmmc = <®_3p3v>; - wp-inverted; - }; - - usb@58000 { - usb-phy = <&usb2_phy>; - status = "okay"; - }; - - usb3@f0000 { - status = "okay"; - }; - - usb3@f8000 { - status = "okay"; - }; - - pinctrl@18000 { - pca0_pins: pca0-pins { - marvell,pins = "mpp23"; - marvell,function = "gpio"; - }; - microsom_phy0_int_pins: microsom-phy0-int-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - helios_i2c1_pins: i2c1-pins { - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - helios_sdhci_cd_pins: helios-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - helios_sdhci_pins: helios-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - helios_system_led_pins: helios-system-led-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "gpio"; - }; - helios_io_led_pins: helios-io-led-pins { - marvell,pins = "mpp49", "mpp50", - "mpp52", "mpp53", - "mpp54"; - marvell,function = "gpio"; - }; - helios_fan1_pins: helios_fan1_pins { - marvell,pins = "mpp41", "mpp43"; - marvell,function = "gpio"; - }; - helios_fan2_pins: helios_fan2_pins { - marvell,pins = "mpp48", "mpp55"; - marvell,function = "gpio"; - }; - microsom_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp59"; - marvell,function = "spi1"; - }; - }; - }; - }; -}; |