diff options
Diffstat (limited to 'arch/arm/boot/dts/am57xx-sbc-am57x.dts')
| -rw-r--r-- | arch/arm/boot/dts/am57xx-sbc-am57x.dts | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts deleted file mode 100644 index beef63e8a005..000000000000 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ /dev/null @@ -1,176 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Support for CompuLab SBC-AM57x single board computer - * - * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - */ - -#include "am57xx-cl-som-am57x.dts" -#include "compulab-sb-som.dtsi" - -/ { - model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x"; - compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - aliases { - display0 = &lcd0; - display1 = &hdmi; - }; -}; - -&dra7_pmx_core { - uart3_pins_default: uart3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */ - DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - i2c5_pins_default: i2c5_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - lcd_pins_default: lcd_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */ - >; - }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - hdmi_conn_pins: pinmux_hdmi_conn_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */ - >; - }; -}; - -&uart3 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3f8>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_default>; -}; - -&mmc1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; -}; - -&i2c5 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_default>; - clock-frequency = <400000>; - - eeprom_base: atmel@54 { - compatible = "atmel,24c08"; - reg = <0x54>; - pagesize = <16>; - }; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&dss { - status = "okay"; - - vdda_video-supply = <&ldoln_reg>; - - port { - dpi_lcd_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <24>; - }; - }; -}; - -&lcd0 { - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins_default>; - - enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH - &gpio4 0 GPIO_ACTIVE_HIGH>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_lcd_out>; - data-lines = <24>; - }; - }; -}; - -&hdmi { - status = "okay"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - lanes = <1 0 3 2 5 4 7 6>; - }; - }; -}; - -&hdmi_conn { - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_conn_pins>; - - hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; -}; |