diff options
Diffstat (limited to 'arch/arm/boot/dts/am335x-wega.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/am335x-wega.dtsi | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi deleted file mode 100644 index 6a103f17585b..000000000000 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2015 Phytec Messtechnik GmbH - * Author: Teresa Remmet <t.remmet@phytec.de> - */ - -/ { - model = "Phytec AM335x phyBOARD-WEGA"; - compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; - - sound: sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "snd-wega"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&sound_iface_main>; - simple-audio-card,frame-master = <&sound_iface_main>; - simple-audio-card,mclk-fs = <32>; - simple-audio-card,widgets = - "Line", "Line In", - "Line", "Line Out", - "Speaker", "Speaker"; - simple-audio-card,routing = - "Line Out", "LLOUT", - "Line Out", "RLOUT", - "Speaker", "SPOP", - "Speaker", "SPOM", - "LINE1L", "Line In", - "LINE1R", "Line In"; - - simple-audio-card,cpu { - sound-dai = <&mcasp0>; - }; - - sound_iface_main: simple-audio-card,codec { - sound-dai = <&tlv320aic3007>; - clocks = <&mcasp0_fck>; - }; - - }; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; -}; - -/* Audio */ -&am33xx_pinmux { - mcasp0_pins: pinmux-mcasp0 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; -}; - -&i2c0 { - tlv320aic3007: tlv320aic3007@18 { - #sound-dai-cells = <0>; - compatible = "ti,tlv320aic3007"; - reg = <0x18>; - AVDD-supply = <&vcc3v3>; - IOVDD-supply = <&vcc3v3>; - DRVDD-supply = <&vcc3v3>; - DVDD-supply = <&vdig1_reg>; - status = "okay"; - }; -}; - -&mcasp0 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mcasp0_pins>; - op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */ - tdm-slots = <2>; - serial-dir = < - 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */ - >; - tx-num-evt = <16>; - rx-num-evt = <16>; - status = "okay"; -}; - - -/* CAN Busses */ -&am33xx_pinmux { - dcan1_pins: pinmux-dcan1 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ - AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ - >; - }; -}; - -&dcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&dcan1_pins>; - status = "okay"; -}; - -/* Ethernet */ -&am33xx_pinmux { - ethernet1_pins: pinmux-ethernet1 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ - AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ - AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ - >; - }; -}; - -&cpsw_port2 { - status = "okay"; - phy-handle = <&phy1>; - phy-mode = "mii"; - ti,dual-emac-pvid = <2>; -}; - -&davinci_mdio_sw { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mac_sw { - pinctrl-names = "default"; - pinctrl-0 = <ðernet0_pins ðernet1_pins>; -}; - -/* MMC */ -&am33xx_pinmux { - mmc1_pins: pinmux-mmc1 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&vcc3v3>; - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -/* Power */ -&vdig1_reg { - regulator-boot-on; - regulator-always-on; -}; - -/* UARTs */ -&am33xx_pinmux { - uart0_pins: pinmux-uart0 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; - - uart1_pins: pinmux-uart1 { - pinctrl-single,pins = < - AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0) - AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0) - >; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -&usb1 { - dr_mode = "host"; -}; |