1 files changed, 0 insertions, 122 deletions
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
deleted file mode 100644
index 742fcf525e1b..000000000000
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * aks-cdu.dts - Device Tree file for AK signal CDU
- *
- * Copyright (C) 2012 AK signal Brno a.s.
- *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- */
-
-/dts-v1/;
-
-#include "ge863-pro3.dtsi"
-
-/ {
-	chosen {
-		bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs";
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-				};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-				linux,rs485-enabled-at-boot-time;
-				rs485-rts-delay = <0 0>;
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			nand_controller: nand-controller {
-				nand: nand@3 {
-					partitions {
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x40000>;
-						};
-
-						uboot@40000 {
-							label = "uboot";
-							reg = <0x40000 0x80000>;
-						};
-
-						ubootenv@c0000 {
-							label = "ubootenv";
-							reg = <0xc0000 0x40000>;
-						};
-
-						kernel@100000 {
-							label = "kernel";
-							reg = <0x100000 0x400000>;
-						};
-
-						rootfs@500000 {
-							label = "rootfs";
-							reg = <0x500000 0x7b00000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		red {
-			gpios = <&pioC 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-		};
-
-		green {
-			gpios = <&pioA 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		yellow {
-			gpios = <&pioB 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		blue {
-			gpios = <&pioB 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-};