aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/misc-devices/ad525x_dpot.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/misc-devices/ad525x_dpot.rst')
-rw-r--r--Documentation/misc-devices/ad525x_dpot.rst57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/misc-devices/ad525x_dpot.rst b/Documentation/misc-devices/ad525x_dpot.rst
new file mode 100644
index 000000000000..6483ec254520
--- /dev/null
+++ b/Documentation/misc-devices/ad525x_dpot.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+AD525x Digital Potentiometers
+=============================
+
+The ad525x_dpot driver exports a simple sysfs interface. This allows you to
+work with the immediate resistance settings as well as update the saved startup
+settings. Access to the factory programmed tolerance is also provided, but
+interpretation of this settings is required by the end application according to
+the specific part in use.
+
+Files
+=====
+
+Each dpot device will have a set of eeprom, rdac, and tolerance files. How
+many depends on the actual part you have, as will the range of allowed values.
+
+The eeprom files are used to program the startup value of the device.
+
+The rdac files are used to program the immediate value of the device.
+
+The tolerance files are the read-only factory programmed tolerance settings
+and may vary greatly on a part-by-part basis. For exact interpretation of
+this field, please consult the datasheet for your part. This is presented
+as a hex file for easier parsing.
+
+Example
+=======
+
+Locate the device in your sysfs tree. This is probably easiest by going into
+the common i2c directory and locating the device by the i2c slave address::
+
+ # ls /sys/bus/i2c/devices/
+ 0-0022 0-0027 0-002f
+
+So assuming the device in question is on the first i2c bus and has the slave
+address of 0x2f, we descend (unrelated sysfs entries have been trimmed)::
+
+ # ls /sys/bus/i2c/devices/0-002f/
+ eeprom0 rdac0 tolerance0
+
+You can use simple reads/writes to access these files::
+
+ # cd /sys/bus/i2c/devices/0-002f/
+
+ # cat eeprom0
+ 0
+ # echo 10 > eeprom0
+ # cat eeprom0
+ 10
+
+ # cat rdac0
+ 5
+ # echo 3 > rdac0
+ # cat rdac0
+ 3