1 files changed, 0 insertions, 71 deletions
diff --git a/Documentation/mips/ingenic-tcu.rst b/Documentation/mips/ingenic-tcu.rst
deleted file mode 100644
index c5a646b14450..000000000000
--- a/Documentation/mips/ingenic-tcu.rst
+++ /dev/null
@@ -1,71 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===============================================
-Ingenic JZ47xx SoCs Timer/Counter Unit hardware
-===============================================
-
-The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
-hardware block. It features up to to eight channels, that can be used as
-counters, timers, or PWM.
-
-- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
-  have eight channels.
-
-- JZ4725B introduced a separate channel, called Operating System Timer
-  (OST). It is a 32-bit programmable timer. On JZ4760B and above, it is
-  64-bit.
-
-- Each one of the TCU channels has its own clock, which can be reparented to three
-  different clocks (pclk, ext, rtc), gated, and reclocked, through their TCSR register.
-
-    - The watchdog and OST hardware blocks also feature a TCSR register with the same
-      format in their register space.
-    - The TCU registers used to gate/ungate can also gate/ungate the watchdog and
-      OST clocks.
-
-- Each TCU channel works in one of two modes:
-
-    - mode TCU1: channels cannot work in sleep mode, but are easier to
-      operate.
-    - mode TCU2: channels can work in sleep mode, but the operation is a bit
-      more complicated than with TCU1 channels.
-
-- The mode of each TCU channel depends on the SoC used:
-
-    - On the oldest SoCs (up to JZ4740), all of the eight channels operate in
-      TCU1 mode.
-    - On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
-    - On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
-      others operate as TCU1.
-
-- Each channel can generate an interrupt. Some channels share an interrupt
-  line, some don't, and this changes between SoC versions:
-
-    - on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
-      own interrupt line; channels 2-7 share the last interrupt line.
-    - On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
-      interrupt line; the OST uses the last interrupt line.
-    - on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
-      channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
-      the OST uses the last interrupt line.
-
-Implementation
-==============
-
-The functionalities of the TCU hardware are spread across multiple drivers:
-
-===========  =====
-clocks       drivers/clk/ingenic/tcu.c
-interrupts   drivers/irqchip/irq-ingenic-tcu.c
-timers       drivers/clocksource/ingenic-timer.c
-OST          drivers/clocksource/ingenic-ost.c
-PWM          drivers/pwm/pwm-jz4740.c
-watchdog     drivers/watchdog/jz4740_wdt.c
-===========  =====
-
-Because various functionalities of the TCU that belong to different drivers
-and frameworks can be controlled from the same registers, all of these
-drivers access their registers through the same regmap.
-
-For more information regarding the devicetree bindings of the TCU drivers,
-have a look at Documentation/devicetree/bindings/timer/ingenic,tcu.txt.