diff options
Diffstat (limited to 'Documentation/media/uapi/dvb/frontend-stat-properties.rst')
-rw-r--r-- | Documentation/media/uapi/dvb/frontend-stat-properties.rst | 252 |
1 files changed, 0 insertions, 252 deletions
diff --git a/Documentation/media/uapi/dvb/frontend-stat-properties.rst b/Documentation/media/uapi/dvb/frontend-stat-properties.rst deleted file mode 100644 index 546464db04b5..000000000000 --- a/Documentation/media/uapi/dvb/frontend-stat-properties.rst +++ /dev/null @@ -1,252 +0,0 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/media/uapi/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections - -.. _frontend-stat-properties: - -****************************** -Frontend statistics indicators -****************************** - -The values are returned via ``dtv_property.stat``. If the property is -supported, ``dtv_property.stat.len`` is bigger than zero. - -For most delivery systems, ``dtv_property.stat.len`` will be 1 if the -stats is supported, and the properties will return a single value for -each parameter. - -It should be noted, however, that new OFDM delivery systems like ISDB -can use different modulation types for each group of carriers. On such -standards, up to 3 groups of statistics can be provided, and -``dtv_property.stat.len`` is updated to reflect the "global" metrics, -plus one metric per each carrier group (called "layer" on ISDB). - -So, in order to be consistent with other delivery systems, the first -value at :c:type:`dtv_property.stat.dtv_stats <dtv_stats>` array refers -to the global metric. The other elements of the array represent each -layer, starting from layer A(index 1), layer B (index 2) and so on. - -The number of filled elements are stored at ``dtv_property.stat.len``. - -Each element of the ``dtv_property.stat.dtv_stats`` array consists on -two elements: - -- ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of - the measure (dB measures) and ``uvalue`` is for unsigned values - (counters, relative scale) - -- ``scale`` - Scale for the value. It can be: - - - ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the - frontend, but it was not possible to collect it (could be a - transitory or permanent condition) - - - ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in - 1/1000 dB - - - ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0 - means 0% and 65535 means 100%. - - - ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts - the occurrence of an event, like bit error, block error, or lapsed - time. - - -.. _DTV-STAT-SIGNAL-STRENGTH: - -DTV_STAT_SIGNAL_STRENGTH -======================== - -Indicates the signal strength level at the analog part of the tuner or -of the demod. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power - measured in miliwatts. This value is generally negative. - -- ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100% - measurement for power (actually, 0 to 65535). - - -.. _DTV-STAT-CNR: - -DTV_STAT_CNR -============ - -Indicates the Signal to Noise ratio for the main carrier. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units. - -- ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100% - measurement for Signal/Noise (actually, 0 to 65535). - - -.. _DTV-STAT-PRE-ERROR-BIT-COUNT: - -DTV_STAT_PRE_ERROR_BIT_COUNT -============================ - -Measures the number of bit errors before the forward error correction -(FEC) on the inner coding block (before Viterbi, LDPC or other inner -code). - -This measure is taken during the same interval as -``DTV_STAT_PRE_TOTAL_BIT_COUNT``. - -In order to get the BER (Bit Error Rate) measurement, it should be -divided by -:ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`. - -This measurement is monotonically increased, as the frontend gets more -bit count measurements. The frontend may reset it when a -channel/transponder is tuned. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner - coding. - - -.. _DTV-STAT-PRE-TOTAL-BIT-COUNT: - -DTV_STAT_PRE_TOTAL_BIT_COUNT -============================ - -Measures the amount of bits received before the inner code block, during -the same period as -:ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>` -measurement was taken. - -It should be noted that this measurement can be smaller than the total -amount of bits on the transport stream, as the frontend may need to -manually restart the measurement, losing some data between each -measurement interval. - -This measurement is monotonically increased, as the frontend gets more -bit count measurements. The frontend may reset it when a -channel/transponder is tuned. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of bits counted while measuring - :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`. - - -.. _DTV-STAT-POST-ERROR-BIT-COUNT: - -DTV_STAT_POST_ERROR_BIT_COUNT -============================= - -Measures the number of bit errors after the forward error correction -(FEC) done by inner code block (after Viterbi, LDPC or other inner -code). - -This measure is taken during the same interval as -``DTV_STAT_POST_TOTAL_BIT_COUNT``. - -In order to get the BER (Bit Error Rate) measurement, it should be -divided by -:ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`. - -This measurement is monotonically increased, as the frontend gets more -bit count measurements. The frontend may reset it when a -channel/transponder is tuned. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner - coding. - - -.. _DTV-STAT-POST-TOTAL-BIT-COUNT: - -DTV_STAT_POST_TOTAL_BIT_COUNT -============================= - -Measures the amount of bits received after the inner coding, during the -same period as -:ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>` -measurement was taken. - -It should be noted that this measurement can be smaller than the total -amount of bits on the transport stream, as the frontend may need to -manually restart the measurement, losing some data between each -measurement interval. - -This measurement is monotonically increased, as the frontend gets more -bit count measurements. The frontend may reset it when a -channel/transponder is tuned. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of bits counted while measuring - :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`. - - -.. _DTV-STAT-ERROR-BLOCK-COUNT: - -DTV_STAT_ERROR_BLOCK_COUNT -========================== - -Measures the number of block errors after the outer forward error -correction coding (after Reed-Solomon or other outer code). - -This measurement is monotonically increased, as the frontend gets more -bit count measurements. The frontend may reset it when a -channel/transponder is tuned. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer - coding. - - -.. _DTV-STAT-TOTAL-BLOCK-COUNT: - -DTV-STAT_TOTAL_BLOCK_COUNT -========================== - -Measures the total number of blocks received during the same period as -:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` -measurement was taken. - -It can be used to calculate the PER indicator, by dividing -:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by -:ref:`DTV-STAT-TOTAL-BLOCK-COUNT`. - -Possible scales for this metric are: - -- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the - measurement was not complete yet. - -- ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring - :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`. |