diff options
Diffstat (limited to 'Documentation/hwmon/max8688')
| -rw-r--r-- | Documentation/hwmon/max8688 | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688 deleted file mode 100644 index ca233bec7a8a..000000000000 --- a/Documentation/hwmon/max8688 +++ /dev/null @@ -1,75 +0,0 @@ -Kernel driver max8688 -===================== - -Supported chips: - * Maxim MAX8688 - Prefix: 'max8688' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf - -Author: Guenter Roeck <linux@roeck-us.net> - - -Description ------------ - -This driver supports hardware monitoring for Maxim MAX8688 Digital Power-Supply -Controller/Monitor with PMBus Interface. - -The driver is a client driver to the core PMBus driver. Please see -Documentation/hwmon/pmbus for details on PMBus client drivers. - - -Usage Notes ------------ - -This driver does not auto-detect devices. You will have to instantiate the -devices explicitly. Please see Documentation/i2c/instantiating-devices for -details. - - -Platform data support ---------------------- - -The driver supports standard PMBus driver platform data. - - -Sysfs entries -------------- - -The following attributes are supported. Limits are read-write; all other -attributes are read-only. - -in1_label "vout1" -in1_input Measured voltage. From READ_VOUT register. -in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. -in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. -in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. -in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. -in1_highest Historical maximum voltage. -in1_reset_history Write any value to reset history. - -curr1_label "iout1" -curr1_input Measured current. From READ_IOUT register. -curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. -curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. -curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register. -curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. -curr1_highest Historical maximum current. -curr1_reset_history Write any value to reset history. - -temp1_input Measured temperature. From READ_TEMPERATURE_1 register. -temp1_max Maximum temperature. From OT_WARN_LIMIT register. -temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. -temp1_max_alarm Chip temperature high alarm. Set by comparing - READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING - status is set. -temp1_crit_alarm Chip temperature critical high alarm. Set by comparing - READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT - status is set. -temp1_highest Historical maximum temperature. -temp1_reset_history Write any value to reset history. |