diff options
Diffstat (limited to 'Documentation/hwmon/max16065')
| -rw-r--r-- | Documentation/hwmon/max16065 | 105 |
1 files changed, 0 insertions, 105 deletions
diff --git a/Documentation/hwmon/max16065 b/Documentation/hwmon/max16065 deleted file mode 100644 index 208a29e43010..000000000000 --- a/Documentation/hwmon/max16065 +++ /dev/null @@ -1,105 +0,0 @@ -Kernel driver max16065 -====================== - -Supported chips: - * Maxim MAX16065, MAX16066 - Prefixes: 'max16065', 'max16066' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf - * Maxim MAX16067 - Prefix: 'max16067' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf - * Maxim MAX16068 - Prefix: 'max16068' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf - * Maxim MAX16070/MAX16071 - Prefixes: 'max16070', 'max16071' - Addresses scanned: - - Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf - - -Author: Guenter Roeck <linux@roeck-us.net> - - -Description ------------ - -[From datasheets] The MAX16065/MAX16066 flash-configurable system managers -monitor and sequence multiple system voltages. The MAX16065/MAX16066 can also -accurately monitor (+/-2.5%) one current channel using a dedicated high-side -current-sense amplifier. The MAX16065 manages up to twelve system voltages -simultaneously, and the MAX16066 manages up to eight supply voltages. - -The MAX16067 flash-configurable system manager monitors and sequences multiple -system voltages. The MAX16067 manages up to six system voltages simultaneously. - -The MAX16068 flash-configurable system manager monitors and manages up to six -system voltages simultaneously. - -The MAX16070/MAX16071 flash-configurable system monitors supervise multiple -system voltages. The MAX16070/MAX16071 can also accurately monitor (+/-2.5%) -one current channel using a dedicated high-side current-sense amplifier. The -MAX16070 monitors up to twelve system voltages simultaneously, and the MAX16071 -monitors up to eight supply voltages. - -Each monitored channel has its own low and high critical limits. MAX16065, -MAX16066, MAX16070, and MAX16071 support an additional limit which is -configurable as either low or high secondary limit. MAX16065, MAX16066, -MAX16070, and MAX16071 also support supply current monitoring. - - -Usage Notes ------------ - -This driver does not probe for devices, since there is no register which -can be safely used to identify the chip. You will have to instantiate -the devices explicitly. Please see Documentation/i2c/instantiating-devices for -details. - -WARNING: Do not access chip registers using the i2cdump command, and do not use -any of the i2ctools commands on a command register (0xa5 to 0xac). The chips -supported by this driver interpret any access to a command register (including -read commands) as request to execute the command in question. This may result in -power loss, board resets, and/or Flash corruption. Worst case, your board may -turn into a brick. - - -Sysfs entries -------------- - -in[0-11]_input Input voltage measurements. - -in12_input Voltage on CSP (Current Sense Positive) pin. - Only if the chip supports current sensing and if - current sensing is enabled. - -in[0-11]_min Low warning limit. - Supported on MAX16065, MAX16066, MAX16070, and MAX16071 - only. - -in[0-11]_max High warning limit. - Supported on MAX16065, MAX16066, MAX16070, and MAX16071 - only. - - Either low or high warning limits are supported - (depending on chip configuration), but not both. - -in[0-11]_lcrit Low critical limit. - -in[0-11]_crit High critical limit. - -in[0-11]_alarm Input voltage alarm. - -curr1_input Current sense input; only if the chip supports current - sensing and if current sensing is enabled. - Displayed current assumes 0.001 Ohm current sense - resistor. - -curr1_alarm Overcurrent alarm; only if the chip supports current - sensing and if current sensing is enabled. |