diff options
Diffstat (limited to 'Documentation/hwmon/max16064')
| -rw-r--r-- | Documentation/hwmon/max16064 | 66 |
1 files changed, 0 insertions, 66 deletions
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064 deleted file mode 100644 index 265370f5cb82..000000000000 --- a/Documentation/hwmon/max16064 +++ /dev/null @@ -1,66 +0,0 @@ -Kernel driver max16064 -====================== - -Supported chips: - * Maxim MAX16064 - Prefix: 'max16064' - Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf - -Author: Guenter Roeck <linux@roeck-us.net> - - -Description ------------ - -This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply -Controller with Active-Voltage Output Control and PMBus Interface. - -The driver is a client driver to the core PMBus driver. -Please see Documentation/hwmon/pmbus for details on PMBus client drivers. - - -Usage Notes ------------ - -This driver does not auto-detect devices. You will have to instantiate the -devices explicitly. Please see Documentation/i2c/instantiating-devices for -details. - - -Platform data support ---------------------- - -The driver supports standard PMBus driver platform data. - - -Sysfs entries -------------- - -The following attributes are supported. Limits are read-write; all other -attributes are read-only. - -in[1-4]_label "vout[1-4]" -in[1-4]_input Measured voltage. From READ_VOUT register. -in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. -in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. -in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. -in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. -in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. -in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. -in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. -in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. -in[1-4]_highest Historical maximum voltage. -in[1-4]_reset_history Write any value to reset history. - -temp1_input Measured temperature. From READ_TEMPERATURE_1 register. -temp1_max Maximum temperature. From OT_WARN_LIMIT register. -temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. -temp1_max_alarm Chip temperature high alarm. Set by comparing - READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING - status is set. -temp1_crit_alarm Chip temperature critical high alarm. Set by comparing - READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT - status is set. -temp1_highest Historical maximum temperature. -temp1_reset_history Write any value to reset history. |