diff options
Diffstat (limited to 'Documentation/hwmon/emc2103')
-rw-r--r-- | Documentation/hwmon/emc2103 | 33 |
1 files changed, 0 insertions, 33 deletions
diff --git a/Documentation/hwmon/emc2103 b/Documentation/hwmon/emc2103 deleted file mode 100644 index a12b2c127140..000000000000 --- a/Documentation/hwmon/emc2103 +++ /dev/null @@ -1,33 +0,0 @@ -Kernel driver emc2103 -====================== - -Supported chips: - * SMSC EMC2103 - Addresses scanned: I2C 0x2e - Prefix: 'emc2103' - Datasheet: Not public - -Authors: - Steve Glendinning <steve.glendinning@smsc.com> - -Description ------------ - -The Standard Microsystems Corporation (SMSC) EMC2103 chips -contain up to 4 temperature sensors and a single fan controller. - -Fan rotation speeds are reported in RPM (rotations per minute). An alarm is -triggered if the rotation speed has dropped below a programmable limit. Fan -readings can be divided by a programmable divider (1, 2, 4 or 8) to give -the readings more range or accuracy. Not all RPM values can accurately be -represented, so some rounding is done. With a divider of 1, the lowest -representable value is 480 RPM. - -This driver supports RPM based control, to use this a fan target -should be written to fan1_target and pwm1_enable should be set to 3. - -The 2103-2 and 2103-4 variants have a third temperature sensor, which can -be connected to two anti-parallel diodes. These values can be read -as temp3 and temp4. If only one diode is attached to this channel, temp4 -will show as "fault". The module parameter "apd=0" can be used to suppress -this 4th channel when anti-parallel diodes are not fitted. |