diff options
Diffstat (limited to 'Documentation/hwmon/abituguru3')
| -rw-r--r-- | Documentation/hwmon/abituguru3 | 65 |
1 files changed, 0 insertions, 65 deletions
diff --git a/Documentation/hwmon/abituguru3 b/Documentation/hwmon/abituguru3 deleted file mode 100644 index a6ccfe4bb6aa..000000000000 --- a/Documentation/hwmon/abituguru3 +++ /dev/null @@ -1,65 +0,0 @@ -Kernel driver abituguru3 -======================== - -Supported chips: - * Abit uGuru revision 3 (Hardware Monitor part, reading only) - Prefix: 'abituguru3' - Addresses scanned: ISA 0x0E0 - Datasheet: Not available, this driver is based on reverse engineering. - Note: - The uGuru is a microcontroller with onboard firmware which programs - it to behave as a hwmon IC. There are many different revisions of the - firmware and thus effectivly many different revisions of the uGuru. - Below is an incomplete list with which revisions are used for which - Motherboards: - uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) - uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO) - uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8) - uGuru 2.3.0.0 ~ 2.3.0.9 (AN8) - uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X, - AW9D-MAX) - The abituguru3 driver is only for revison 3.0.x.x motherboards, - this driver will not work on older motherboards. For older - motherboards use the abituguru (without the 3 !) driver. - -Authors: - Hans de Goede <j.w.r.degoede@hhs.nl>, - (Initial reverse engineering done by Louis Kruger) - - -Module Parameters ------------------ - -* force: bool Force detection. Note this parameter only causes the - detection to be skipped, and thus the insmod to - succeed. If the uGuru can't be read the actual hwmon - driver will not load and thus no hwmon device will get - registered. -* verbose: bool Should the driver be verbose? - 0/off/false normal output - 1/on/true + verbose error reporting (default) - Default: 1 (the driver is still in the testing phase) - -Description ------------ - -This driver supports the hardware monitoring features of the third revision of -the Abit uGuru chip, found on recent Abit uGuru featuring motherboards. - -The 3rd revision of the uGuru chip in reality is a Winbond W83L951G. -Unfortunately this doesn't help since the W83L951G is a generic microcontroller -with a custom Abit application running on it. - -Despite Abit not releasing any information regarding the uGuru revision 3, -Louis Kruger has managed to reverse engineer the sensor part of the uGuru. -Without his work this driver would not have been possible. - -Known Issues ------------- - -The voltage and frequency control parts of the Abit uGuru are not supported, -neither is writing any of the sensor settings and writing / reading the -fanspeed control registers (FanEQ) - -If you encounter any problems please mail me <j.w.r.degoede@hhs.nl> and -include the output of: "dmesg | grep abituguru" |