diff options
Diffstat (limited to 'Documentation/filesystems/f2fs.rst')
| -rw-r--r-- | Documentation/filesystems/f2fs.rst | 318 |
1 files changed, 162 insertions, 156 deletions
diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index 099d45ac8d8f..a11d329542f9 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -101,164 +101,170 @@ Mount Options ============= -====================== ============================================================ -background_gc=%s Turn on/off cleaning operations, namely garbage - collection, triggered in background when I/O subsystem is - idle. If background_gc=on, it will turn on the garbage - collection and if background_gc=off, garbage collection - will be turned off. If background_gc=sync, it will turn - on synchronous garbage collection running in background. - Default value for this option is on. So garbage - collection is on by default. -disable_roll_forward Disable the roll-forward recovery routine -norecovery Disable the roll-forward recovery routine, mounted read- - only (i.e., -o ro,disable_roll_forward) -discard/nodiscard Enable/disable real-time discard in f2fs, if discard is - enabled, f2fs will issue discard/TRIM commands when a - segment is cleaned. -no_heap Disable heap-style segment allocation which finds free - segments for data from the beginning of main area, while - for node from the end of main area. -nouser_xattr Disable Extended User Attributes. Note: xattr is enabled - by default if CONFIG_F2FS_FS_XATTR is selected. -noacl Disable POSIX Access Control List. Note: acl is enabled - by default if CONFIG_F2FS_FS_POSIX_ACL is selected. -active_logs=%u Support configuring the number of active logs. In the - current design, f2fs supports only 2, 4, and 6 logs. - Default number is 6. -disable_ext_identify Disable the extension list configured by mkfs, so f2fs - does not aware of cold files such as media files. -inline_xattr Enable the inline xattrs feature. -noinline_xattr Disable the inline xattrs feature. -inline_xattr_size=%u Support configuring inline xattr size, it depends on - flexible inline xattr feature. -inline_data Enable the inline data feature: New created small(<~3.4k) - files can be written into inode block. -inline_dentry Enable the inline dir feature: data in new created - directory entries can be written into inode block. The - space of inode block which is used to store inline - dentries is limited to ~3.4k. -noinline_dentry Disable the inline dentry feature. -flush_merge Merge concurrent cache_flush commands as much as possible - to eliminate redundant command issues. If the underlying - device handles the cache_flush command relatively slowly, - recommend to enable this option. -nobarrier This option can be used if underlying storage guarantees - its cached data should be written to the novolatile area. - If this option is set, no cache_flush commands are issued - but f2fs still guarantees the write ordering of all the - data writes. -fastboot This option is used when a system wants to reduce mount - time as much as possible, even though normal performance - can be sacrificed. -extent_cache Enable an extent cache based on rb-tree, it can cache - as many as extent which map between contiguous logical - address and physical address per inode, resulting in - increasing the cache hit ratio. Set by default. -noextent_cache Disable an extent cache based on rb-tree explicitly, see - the above extent_cache mount option. -noinline_data Disable the inline data feature, inline data feature is - enabled by default. -data_flush Enable data flushing before checkpoint in order to - persist data of regular and symlink. -reserve_root=%d Support configuring reserved space which is used for - allocation from a privileged user with specified uid or - gid, unit: 4KB, the default limit is 0.2% of user blocks. -resuid=%d The user ID which may use the reserved blocks. -resgid=%d The group ID which may use the reserved blocks. -fault_injection=%d Enable fault injection in all supported types with - specified injection rate. -fault_type=%d Support configuring fault injection type, should be - enabled with fault_injection option, fault type value - is shown below, it supports single or combined type. - - =================== =========== - Type_Name Type_Value - =================== =========== - FAULT_KMALLOC 0x000000001 - FAULT_KVMALLOC 0x000000002 - FAULT_PAGE_ALLOC 0x000000004 - FAULT_PAGE_GET 0x000000008 - FAULT_ALLOC_BIO 0x000000010 - FAULT_ALLOC_NID 0x000000020 - FAULT_ORPHAN 0x000000040 - FAULT_BLOCK 0x000000080 - FAULT_DIR_DEPTH 0x000000100 - FAULT_EVICT_INODE 0x000000200 - FAULT_TRUNCATE 0x000000400 - FAULT_READ_IO 0x000000800 - FAULT_CHECKPOINT 0x000001000 - FAULT_DISCARD 0x000002000 - FAULT_WRITE_IO 0x000004000 - =================== =========== -mode=%s Control block allocation mode which supports "adaptive" - and "lfs". In "lfs" mode, there should be no random - writes towards main area. -io_bits=%u Set the bit size of write IO requests. It should be set - with "mode=lfs". -usrquota Enable plain user disk quota accounting. -grpquota Enable plain group disk quota accounting. -prjquota Enable plain project quota accounting. -usrjquota=<file> Appoint specified file and type during mount, so that quota -grpjquota=<file> information can be properly updated during recovery flow, -prjjquota=<file> <quota file>: must be in root directory; -jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1]. -offusrjquota Turn off user journelled quota. -offgrpjquota Turn off group journelled quota. -offprjjquota Turn off project journelled quota. -quota Enable plain user disk quota accounting. -noquota Disable all plain disk quota option. -whint_mode=%s Control which write hints are passed down to block - layer. This supports "off", "user-based", and - "fs-based". In "off" mode (default), f2fs does not pass - down hints. In "user-based" mode, f2fs tries to pass - down hints given by users. And in "fs-based" mode, f2fs - passes down hints with its policy. -alloc_mode=%s Adjust block allocation policy, which supports "reuse" - and "default". -fsync_mode=%s Control the policy of fsync. Currently supports "posix", - "strict", and "nobarrier". In "posix" mode, which is - default, fsync will follow POSIX semantics and does a - light operation to improve the filesystem performance. - In "strict" mode, fsync will be heavy and behaves in line - with xfs, ext4 and btrfs, where xfstest generic/342 will - pass, but the performance will regress. "nobarrier" is - based on "posix", but doesn't issue flush command for - non-atomic files likewise "nobarrier" mount option. +======================== ============================================================ +background_gc=%s Turn on/off cleaning operations, namely garbage + collection, triggered in background when I/O subsystem is + idle. If background_gc=on, it will turn on the garbage + collection and if background_gc=off, garbage collection + will be turned off. If background_gc=sync, it will turn + on synchronous garbage collection running in background. + Default value for this option is on. So garbage + collection is on by default. +disable_roll_forward Disable the roll-forward recovery routine +norecovery Disable the roll-forward recovery routine, mounted read- + only (i.e., -o ro,disable_roll_forward) +discard/nodiscard Enable/disable real-time discard in f2fs, if discard is + enabled, f2fs will issue discard/TRIM commands when a + segment is cleaned. +no_heap Disable heap-style segment allocation which finds free + segments for data from the beginning of main area, while + for node from the end of main area. +nouser_xattr Disable Extended User Attributes. Note: xattr is enabled + by default if CONFIG_F2FS_FS_XATTR is selected. +noacl Disable POSIX Access Control List. Note: acl is enabled + by default if CONFIG_F2FS_FS_POSIX_ACL is selected. +active_logs=%u Support configuring the number of active logs. In the + current design, f2fs supports only 2, 4, and 6 logs. + Default number is 6. +disable_ext_identify Disable the extension list configured by mkfs, so f2fs + does not aware of cold files such as media files. +inline_xattr Enable the inline xattrs feature. +noinline_xattr Disable the inline xattrs feature. +inline_xattr_size=%u Support configuring inline xattr size, it depends on + flexible inline xattr feature. +inline_data Enable the inline data feature: New created small(<~3.4k) + files can be written into inode block. +inline_dentry Enable the inline dir feature: data in new created + directory entries can be written into inode block. The + space of inode block which is used to store inline + dentries is limited to ~3.4k. +noinline_dentry Disable the inline dentry feature. +flush_merge Merge concurrent cache_flush commands as much as possible + to eliminate redundant command issues. If the underlying + device handles the cache_flush command relatively slowly, + recommend to enable this option. +nobarrier This option can be used if underlying storage guarantees + its cached data should be written to the novolatile area. + If this option is set, no cache_flush commands are issued + but f2fs still guarantees the write ordering of all the + data writes. +fastboot This option is used when a system wants to reduce mount + time as much as possible, even though normal performance + can be sacrificed. +extent_cache Enable an extent cache based on rb-tree, it can cache + as many as extent which map between contiguous logical + address and physical address per inode, resulting in + increasing the cache hit ratio. Set by default. +noextent_cache Disable an extent cache based on rb-tree explicitly, see + the above extent_cache mount option. +noinline_data Disable the inline data feature, inline data feature is + enabled by default. +data_flush Enable data flushing before checkpoint in order to + persist data of regular and symlink. +reserve_root=%d Support configuring reserved space which is used for + allocation from a privileged user with specified uid or + gid, unit: 4KB, the default limit is 0.2% of user blocks. +resuid=%d The user ID which may use the reserved blocks. +resgid=%d The group ID which may use the reserved blocks. +fault_injection=%d Enable fault injection in all supported types with + specified injection rate. +fault_type=%d Support configuring fault injection type, should be + enabled with fault_injection option, fault type value + is shown below, it supports single or combined type. + + =================== =========== + Type_Name Type_Value + =================== =========== + FAULT_KMALLOC 0x000000001 + FAULT_KVMALLOC 0x000000002 + FAULT_PAGE_ALLOC 0x000000004 + FAULT_PAGE_GET 0x000000008 + FAULT_ALLOC_BIO 0x000000010 + FAULT_ALLOC_NID 0x000000020 + FAULT_ORPHAN 0x000000040 + FAULT_BLOCK 0x000000080 + FAULT_DIR_DEPTH 0x000000100 + FAULT_EVICT_INODE 0x000000200 + FAULT_TRUNCATE 0x000000400 + FAULT_READ_IO 0x000000800 + FAULT_CHECKPOINT 0x000001000 + FAULT_DISCARD 0x000002000 + FAULT_WRITE_IO 0x000004000 + =================== =========== +mode=%s Control block allocation mode which supports "adaptive" + and "lfs". In "lfs" mode, there should be no random + writes towards main area. +io_bits=%u Set the bit size of write IO requests. It should be set + with "mode=lfs". +usrquota Enable plain user disk quota accounting. +grpquota Enable plain group disk quota accounting. +prjquota Enable plain project quota accounting. +usrjquota=<file> Appoint specified file and type during mount, so that quota +grpjquota=<file> information can be properly updated during recovery flow, +prjjquota=<file> <quota file>: must be in root directory; +jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1]. +offusrjquota Turn off user journelled quota. +offgrpjquota Turn off group journelled quota. +offprjjquota Turn off project journelled quota. +quota Enable plain user disk quota accounting. +noquota Disable all plain disk quota option. +whint_mode=%s Control which write hints are passed down to block + layer. This supports "off", "user-based", and + "fs-based". In "off" mode (default), f2fs does not pass + down hints. In "user-based" mode, f2fs tries to pass + down hints given by users. And in "fs-based" mode, f2fs + passes down hints with its policy. +alloc_mode=%s Adjust block allocation policy, which supports "reuse" + and "default". +fsync_mode=%s Control the policy of fsync. Currently supports "posix", + "strict", and "nobarrier". In "posix" mode, which is + default, fsync will follow POSIX semantics and does a + light operation to improve the filesystem performance. + In "strict" mode, fsync will be heavy and behaves in line + with xfs, ext4 and btrfs, where xfstest generic/342 will + pass, but the performance will regress. "nobarrier" is + based on "posix", but doesn't issue flush command for + non-atomic files likewise "nobarrier" mount option. test_dummy_encryption test_dummy_encryption=%s - Enable dummy encryption, which provides a fake fscrypt - context. The fake fscrypt context is used by xfstests. - The argument may be either "v1" or "v2", in order to - select the corresponding fscrypt policy version. -checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable" - to reenable checkpointing. Is enabled by default. While - disabled, any unmounting or unexpected shutdowns will cause - the filesystem contents to appear as they did when the - filesystem was mounted with that option. - While mounting with checkpoint=disabled, the filesystem must - run garbage collection to ensure that all available space can - be used. If this takes too much time, the mount may return - EAGAIN. You may optionally add a value to indicate how much - of the disk you would be willing to temporarily give up to - avoid additional garbage collection. This can be given as a - number of blocks, or as a percent. For instance, mounting - with checkpoint=disable:100% would always succeed, but it may - hide up to all remaining free space. The actual space that - would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable - This space is reclaimed once checkpoint=enable. -compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo", - "lz4", "zstd" and "lzo-rle" algorithm. -compress_log_size=%u Support configuring compress cluster size, the size will - be 4KB * (1 << %u), 16KB is minimum size, also it's - default size. -compress_extension=%s Support adding specified extension, so that f2fs can enable - compression on those corresponding files, e.g. if all files - with '.ext' has high compression rate, we can set the '.ext' - on compression extension list and enable compression on - these file by default rather than to enable it via ioctl. - For other files, we can still enable compression via ioctl. -====================== ============================================================ + Enable dummy encryption, which provides a fake fscrypt + context. The fake fscrypt context is used by xfstests. + The argument may be either "v1" or "v2", in order to + select the corresponding fscrypt policy version. +checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable" + to reenable checkpointing. Is enabled by default. While + disabled, any unmounting or unexpected shutdowns will cause + the filesystem contents to appear as they did when the + filesystem was mounted with that option. + While mounting with checkpoint=disabled, the filesystem must + run garbage collection to ensure that all available space can + be used. If this takes too much time, the mount may return + EAGAIN. You may optionally add a value to indicate how much + of the disk you would be willing to temporarily give up to + avoid additional garbage collection. This can be given as a + number of blocks, or as a percent. For instance, mounting + with checkpoint=disable:100% would always succeed, but it may + hide up to all remaining free space. The actual space that + would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable + This space is reclaimed once checkpoint=enable. +compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo", + "lz4", "zstd" and "lzo-rle" algorithm. +compress_log_size=%u Support configuring compress cluster size, the size will + be 4KB * (1 << %u), 16KB is minimum size, also it's + default size. +compress_extension=%s Support adding specified extension, so that f2fs can enable + compression on those corresponding files, e.g. if all files + with '.ext' has high compression rate, we can set the '.ext' + on compression extension list and enable compression on + these file by default rather than to enable it via ioctl. + For other files, we can still enable compression via ioctl. +inlinecrypt When possible, encrypt/decrypt the contents of encrypted + files using the blk-crypto framework rather than + filesystem-layer encryption. This allows the use of + inline encryption hardware. The on-disk format is + unaffected. For more details, see + Documentation/block/inline-encryption.rst. +======================== ============================================================ Debugfs Entries =============== |