1 files changed, 0 insertions, 112 deletions
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
deleted file mode 100644
index add1caf26ac2..000000000000
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-   further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
-  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
-   information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
-  interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells :  Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
-	["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-  (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
-	[<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
-	[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
-	[<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
-	[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
-	["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
-	[<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
-	[0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
-	[0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
-	[0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
-	[0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
-	[<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
-	[<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		VDD-supply = <&reg_audio>;
-		VDDMIC-supply = <&reg_audio>;
-		VDDIO-supply = <&reg_audio>;
-
-		#clock-cells = <1>;
-		clock-output-names = "dai-wclk", "dai-bclk";
-
-		clocks = <&clks 201>;
-		clock-names = "mclk";
-
-		dlg,ldo-lvl = <1200>;
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-
-		da7219_aad {
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-
-			dlg,btn-avg = <4>;
-			dlg,adc-1bit-rpt = <1>;
-		};
-	};