diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 163 |
1 files changed, 163 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml new file mode 100644 index 000000000000..8a4b7ba3aaf6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + enum: + - qcom,geni-se-qup + - qcom,geni-se-i2c-master-hub + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 2 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + interconnects: + maxItems: 1 + + interconnect-names: + const: qup-core + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - clock-names + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,geni-se-i2c-master-hub + then: + properties: + clock-names: + items: + - const: s-ahb + + clocks: + items: + - description: Slave AHB Clock + + iommus: false + + patternProperties: + "spi@[0-9a-f]+$": false + "serial@[0-9a-f]+$": false + else: + properties: + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xa94000 0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_i2c_5_active>; + pinctrl-1 = <&qup_1_i2c_5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0xa88000 0 0x7000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_uart_3_active>; + pinctrl-1 = <&qup_1_uart_3_sleep>; + }; + }; + }; + +... |