diff options
Diffstat (limited to 'Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt')
-rw-r--r-- | Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt index c1091a923a89..1a7e4bff0456 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -21,6 +21,11 @@ Optional properties: the second cell is used to specify the GPIO polarity: 0 = active high, 1 = active low. +- irda-mode-ports: An array that lists the indices of the port that + should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@51 { @@ -33,6 +38,26 @@ Example: #gpio-cells = <2>; }; + sc16is752: sc16is752@53 { + compatible = "nxp,sc16is752"; + reg = <0x53>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@54 { + compatible = "nxp,sc16is752"; + reg = <0x54>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; + * spi as bus Required properties: @@ -55,6 +80,11 @@ Optional properties: the second cell is used to specify the GPIO polarity: 0 = active high, 1 = active low. +- irda-mode-ports: An array that lists the indices of the port that + should operate in IrDA mode. +- nxp,modem-control-line-ports: An array that lists the indices of the port that + should have shared GPIO lines configured as + modem control lines. Example: sc16is750: sc16is750@0 { @@ -66,3 +96,23 @@ Example: gpio-controller; #gpio-cells = <2>; }; + + sc16is752: sc16is752@1 { + compatible = "nxp,sc16is752"; + reg = <1>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */ + gpio-controller; /* Port 0 as GPIOs */ + #gpio-cells = <2>; + }; + + sc16is752: sc16is752@2 { + compatible = "nxp,sc16is752"; + reg = <2>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */ + }; |